SPI Supplies Brand PTFE Bottle for Laboratory Use

SPI Supplies Brand PTFE Bottle for Laboratory Use, 1 ml
Size 1 ml
Item02021-AB
AvailabilityIn Stock
$18.08
SPI Supplies Brand PTFE Bottle for Laboratory Use, 5 ml
Size 5 ml
Item02023-AB
AvailabilityIn Stock
$26.24
SPI Supplies Brand PTFE Bottle for Laboratory Use, 10 ml
Size 10 ml
Item02024-AB
AvailabilityIn Stock
$36.55
SPI Supplies Brand PTFE Bottle for Laboratory Use, 25 ml
Size 25 ml
Item02025-AB
AvailabilityIn Stock
$45.81
SPI Supplies Brand PTFE Bottle for Laboratory Use, 50 ml
Size 50 ml
Item02026-AB
AvailabilityIn Stock
$56.65
SPI Supplies Brand PTFE Bottle for Laboratory Use, 100 ml
Size 100 ml
Item02027-AB
AvailabilityIn Stock
$80.61
SPI Supplies Brand PTFE Bottle for Laboratory Use, 150 ml
Size 150 ml
Item02028-AB
AvailabilityIn Stock
$88.35
SPI Supplies Brand PTFE Bottle for Laboratory Use, 250 ml
Size 250 ml
Item02029-AB
AvailabilityIn Stock
$103.55
SPI Supplies Brand PTFE Bottle for Laboratory Use, 500 ml
Size 500 ml
Item02030-AB
AvailabilityIn Stock
$156.82
SPI Supplies Brand PTFE Bottle for Laboratory Use, 1000 ml
Size 1000 ml
Item02031-AB
AvailabilityIn Stock
$248.07
SPI Supplies Brand PTFE Bottle for Laboratory Use, 2000 ml
Size 2000 ml
Item02032-AB
AvailabilityIn Stock
$450.60

All SPI Supplies Brand PTFE bottles are chemically inert, non-contaminating, and are thermally stable in the range of -200°C (390°F) to + 280°C (+536°F). The bottles also have a "super smooth" finish making it virtually impossible for anything to "stick" to the surface of these fine laboratory products.

VolumeHeightBase DiameterNeck Diameter
02021-AB1 ml / 0.03 fl oz27 mm16 mm10 mm
02023-AB5 ml / 0.17 fl oz35 mm22 mm10 mm
02024-AB10 ml / 0.30 fl oz50 mm26 mm12 mm
02025-AB25 ml / 0.83 fl oz61 mm33 mm19 mm
02026-AB50 ml / 1.67 fl oz76 mm43 mm25 mm
02027-AB100 ml / 3.33 fl oz88 mm52 mm35 mm
02028-AB150 ml / 5.00 fl oz90 mm60 mm35 mm
02029-AB250 ml / 8.33 fl oz115 mm67 mm42 mm
02030-AB500 ml / 16.70 fl oz150 mm80 mm52 mm
02031-AB1000 ml / 33.30 fl oz185 mm100 mm57 mm
02032-AB2000 ml / 66.60 fl oz240 mm120 mm60 mm

Details of the manufacturing:
The bottles are isostatically molded from pure virgin PTFE resulting in a highly inert material, with very heavy wall construction, one that will stand up to nearly everything one might want to put into it. The super smooth internal finish means that virtually nothing will really stick to it. The base is precision machined for good heat transfer on a hot plate. The screw cap houses a PTFE encapsulated "O" ring seal for total leak-free performance. As if this were not enough, there are also mini-hand grips for ease of handling.

Cautions about over heating:
PTFE beakers can not be taken to temperatures as high as glass. The user has to be sure they do not overheat PTFE beakers. If PTFE is overheated, especially in air, it can start to break down by both thermal decomposition and oxidation, resulting in fumes of HF which should not be inhaled under any circumstances.

Use in connection with food:
Isostatically molded in pure, FDA approved, PTFE

Important Safety Notice:
Do not use when sealed for chemical reactions or digestions. Loosen lid when thermally sterilizing.