HOPG Advanced Ceramics Brand Grade ZYB 12x12x2 mm Thick, Package of 1 Piece
Suitable for most research applications when samples are to be mounted samples for analysis. It is also easily renewed and the user should be able to get fifteen to twenty cleavings per HOPG block. Mosaic spread is 0.8° +/- 0.2°.
Dimensions = 12mm x 12 mm x 2 mm
(can be as thin as 1.6)
Momentive Performance Materials
The Advanced Ceramics brand of HOPG was originally produced by Union Carbide Corporation and then became Advanced Ceramics. Advanced Ceramics became part of General Electric Company and then, in 2007, became Momentive Performance Materials. The product is the same product, made by the same people, despite the name changes. Advanced Ceramics HOPG comes in three different grades, historically known as ZYA, ZYB and ZYH, as described below. This was the "original" brand of HOPG that the original researchers with SPM technology used for the development of the techniques and methods used throughout the world today.
Measurement of the Mosaic Spread:
We have been told by the manufacturer that the method used is x-ray diffraction and that for each and every single piece of Advanced Ceramics HOPG that is sold, there have been not less than four different measurements made on each of the two sides. Clearly this level of measurement goes beyond what is done for the SPI Supplies brand of HOPG. We have also been told that there has never been any evidence that there is any difference in the mosaic spread, one side of the plate to the other.
|Properties of Momentive Performance Materials HOPG|
|Thermal Conductivity (W/mK)||1600-2000||~8|
|Thermal Expansion ( C)||Slightly negative||20 X 10 -6|
|Electrical resistivity (ohm-cm)||3.5-4.5 x 10-5||0.15-0.25|