Wafer-Mount 562 Thermoplastic Film Adhesive

 
Wafer-Mount 562 Thermoplastic Film Adhesive, Pack of 10 Sheets
Quantity Pack of 10 Shee
Item05115-BA
AvailabilityIn Stock
$87.75
 
Wafer-Mount 562 Thermoplastic Film Adhesive, Pack of 20 Sheets
Quantity Pack of 20 Shee
Item05115-CA
AvailabilityContact for Availability
$165.60

Wafer-Mount 562

Thermoplastic film adhesive with good adhesive properties. Ideal for mounting fragile, thin substrates for which a predictable film thickness is required.

Characteristics:

  • Resistance to water: Will not dissolve in water but it might swell slightly after long term water exposure. Most dicing operations are relatively quick (less than thirty minutes per substrate) so extended exposure time is generally not an issue.
  • Solvent: Acetone or Stripper 562-S
  • Flow Point: 93°C (200°F)
  • Dimensions: 0.002" (0.05 mm) x 8" (203 mm) x 10" (254 mm) sheets
  • Color: White
  • Solvent: Acetone or 562-S

 

The easiest way to work with wafer mount products is to place the sheet onto a cardboard sheet and use a sharp knife to cut the piece to shape. A sharp blade is preferred. Scissors generally will not be sufficient to cut the sheets. Suggested blades may be found on our webpage: 05027-MB and 05034-MB