Detonox Heavy Duty Liquid Detergent

Detonox Heavy Duty Liquid Detergent 1 Gallon
Quantity 1 Gallon
Item01104-AB
AvailabilityIn Stock
$129.92
Detonox Heavy Duty Liquid Detergent 4x1 Gallon Case
Quantity 4x1 Gallon
Item01104-AE
AvailabilityContact for Availability
$433.06
 
Detonox Heavy Duty Liquid Detergent 5 Gallon Can
Quantity 5 Gallon Can
Item01104A-AB
AvailabilityItem Not Available

For hand and ultrasonic use on difficult residues. Ultimate Precision Cleaner, Biodegradable, Exceptional emulsifying, Interfering-residue free. Non-caustic for greater worker safety and greater material compatibility. Free rinsing to give you reliable results and no interfering residues

Used to Remove: Cosmetic bases and formulations, organics, grease, tars, resins, waxes, fats, oils, titanium and zinc oxides, ointments and lotions

Surfaces Cleaned: Recommended for glass, stainless steel, PTFE, ceramic, cement, and solvent resistant plastics and metals. Corrosion testing is advisable. 

Cleaning Method: Soak, circulate under immersions, ultrasonic cleaners, and manual cleaning.

Concentrated.  Dilute 1:100. pH 10.5. 

Directions: Make a fresh 1-3% solution (1¼ -3 3/4 oz. per gal. or 10-30 ml per liter) in cold, warm or hot water. If available, use very hot water to clean cosmetic residues. For difficult soils, raise water temperature and use more detergent. Elevation of temperature is true under most circumstances.  Check with Alconox Inc, for use of hot water if products contain Titanium Oxide (TiO) or Zinc Oxide (ZnO) as they are notable exceptions to heat expediting detergency. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in purified water.  

Caution: Contains anionic and nonionic surfactants with phosphate chelating agents. May cause skin and eye irritation. Wear eye protection and chemical resistant gloves

PHYSICAL DATA  Typical Value
pH (1% DI Water): 10
Specific gravity:(g/ml)  1.08
Density: (lbs./gal.)  9.0
Flash Point:(degrees F–open cup) >212 deg F
Phosphate Content:(as Phosphorus)  0.9% as P
Fragrance Content: None
Surface Tension 1% Sol'n (Dyne/cm):  32
Appearance: Pale yellow liquid
Solubility in Water: Soluble in all proportions
Biodegradability: Biodegradable
Foam Tendency: High Foaming
Shelf Life: Two years from date of manufacture
Documents