Crystalbond Stripper 562-S Gallon (3.785 L)
Wafer-Mount™ 562-S Stripper is a high-performance, environmentally-safe, chemical cleaning agent developed specifically for removing Wafer-Mount™ 562, and other tenacious polymer coatings and inorganic particulates.
- Low Evaporation Rate
- Rinses with Water
- Non-Reactive with Metals
Wafer-Mount™ 562-S Stripper works best in ultrasonic cleaning systems at 50-60 °C. The evaporation rate is much slower than acetone, so a good lifecycle will be achieved in comparison. As adhesive residue begins to concentrate in the stripper, 20% of the stripper should be replaced with fresh material.
After removing the adhesive, a stepwise, warm-rinsing process is recommended. Rinse in a dilute, nonionic surfactant or liquid detergent system, followed by a final rinse in de-ionized water to eliminate water spots due to hard salts and contaminant redeposition.
Wafer-Mount™ 562-S Stripper is nonionic and non-reactive with metals, however, it will attack many types of polymers and plastics such as elastomers and rubbers.
Handling and Storage:
Wafer-Mount™ 562-S Stripper is readily biodegradable and non-toxic to marine life. The use of gloves and eye goggles is recommended. Respiratory protection or ventilation is recommended under normal handling. When heated, vapors should be ventilated from work space. Keep container tightly closed and store in a cool, dry, well-ventilated area or cabinet. Isolate from incompatibles such as corrosives, oxidizers, or strong reducing agents.
Proper Shipping Name: Potassium Hydroxide Solution
Packing Group: II
Storage conditions: Room temperature
Hazardous from stand point of shipping
Also, isolate from incompatibles such as corrosives, oxidizers, or strong reducing agents.