CrystalBond 590 Powder, 1 lb

Crystalbond 590 Powder
1 lb container

The same materials as that found in the form, the powder form allows the user to liquify and apply the product without melting.

High strength, resilient adhesive system, ideal for dicing miniature and tall parts.

Characteristics:

Resistance to water: Will not dissolve in water but it might swell slightly after long term water exposure. Most dicing operations are relatively fast (less than thirty minutes per substrate) so extended exposure time is generally not an issue.

    Solvent: Methanol or 590-S Stripper
    Color and Appearance: Brown Powder
    Flow Point: 150°C (302.2°F)
    Viscosity at Flow Point: 9000 cps
    Softening Point: 125°C (257°F)
    Weight per stick: ~ 0.5 lb (227g)

Using Crystalbond 590 in a liquid form

1) Blend approximately 65 parts isopropyl alcohol and 35 parts 590-PDR powder by weight. Stir contents regularly to prevent settling of solids.
2) Apply a thin film of the mixture to both substrates to be bonded and evaporate solvents naturally or using an oven at ~250°F for ~10 minutes. Remove from oven and allow to cool.
3) Clamp parts together and place them in the oven at 300°F for ~30 minutes. Remove parts and allow them to cool to room temperature before processing.