SPI Supplies Brand PTFE Test Tubes, Round Bottom with Screw Cap

SPI Supplies Brand PTFE Test Tubes, Round Bottom with Screw Cap, 105mmx12mm, 8 ml
Volume 8 ml
Item02043-AB
AvailabilityIn Stock
$29.77
SPI Supplies Brand PTFE Test Tubes, Round Bottom with Screw Cap, 105mmx18mm, 17 ml
Volume 17 ml
Item02044-AB
AvailabilityIn Stock
$35.53
SPI Supplies Brand PTFE Test Tubes, Round Bottom with Screw Cap, 145mmx25mm, 50 ml
Volume 50 ml
Item02045-AB
AvailabilityIn Stock
$61.25

The SPI Supplies Brand PTFE Test Tubes are manufactured from pure virgin PTFE for maximum consistency and homogeneity which results in a "super-smooth" internal surface finish. The PTFE test tubes are inert and usable to 280°C.

Why PTFE test tubes?
Simply put, contaminants can be leached out of glass and then detected in one's samples with many of today's modern instruments of analysis. Leaching has occurred from time immemorial, of course, but it is only in the relatively recent past that these trace impurities could be detected. However, if PTFE test tubes are used, one can avoid completely this potential problem.

Choose from one of the options available: A round or a conical bottom, both are available with or without a screw cap.

Height and Diameter measurements are external or outer diameter.

Part # Volume Height Diameter Screw
Cap
Bottom
Shape
01936-AB 8 ml 100 mm 12 mm No Round
01937-AB 17 ml 100 mm 18 mm No Round
01938-AB 50 ml 100 mm 25 mm No Round
02043-AB 8 ml 100 mm 12 mm Yes Round
02044-AB 17 ml 100 mm 18 mm Yes Round
02045-AB 50 ml 100 mm 25 mm Yes Round
02074-AB 13 ml 110 mm 16 mm No Conical
02077-AB 18 ml 120 mm 18 mm No Conical
02013-AB 45 ml 150 mm 25 mm No Conical
02080-AB 13 ml 110 mm 16 mm Yes Conical
02103-AB 18 ml 120 mm 18 mm Yes Conical
02130-AB 45 ml 150 mm 25 mm Yes Conical