BYTAC Bench & Shelf Protector Sheets, VF-81, FEP PTFE on Vinyl Backing

BYTAC Bench & Shelf Protector Sheets, VF-81, FEP PTFE 1 in. x 36 yds. on Vinyl Backing
Size 1 in. x 36 yds.
Item01431-AB
AvailabilityIn Stock
$109.21
BYTAC Bench & Shelf Protector Sheets, VF-81, FEP PTFE 2 in. x 36 yds. on Vinyl Backing
Size 2 in. x 36 yds.
Item01432-AB
AvailabilityIn Stock
$215.92
BYTAC Bench & Shelf Protector Sheets, VF-81, FEP PTFE 4 in. x 36 yds. on Vinyl Backing
Size 4 in. x 36 yds.
Item01433-AB
AvailabilityIn Stock
$431.76
BYTAC Bench & Shelf Protector Sheets, VF-81, FEP PTFE 12.5 in. x 5 yds. on Vinyl Backing
Size 12.5in. x 5 yds
Item01434-AB
AvailabilityIn Stock
$206.71
BYTAC Bench & Shelf Protector Sheets, VF-81, FEP PTFE 25in. x 5 yds. on Vinyl Backing
Size 25in. x 5 yds.
Item01435-AB
AvailabilityIn Stock
$389.39

The inexpensive way to put PTFE protection onto any surface BYTAC Bench and Shelf Protector is a 0.001" (25.4 µm) layer of PTFE film on a smooth, tough support backing (vinyl or aluminum foil) with a pressure-sensitive adhesive. It provides an easy-to-apply, easy-to-clean, non-stick covering for a wide variety of applications. It is not affected by moisture, weather, or most chemicals. It also protects all kinds of surfaces against the absorption of toxic or radioactive chemicals.

Use BYTAC for protection against damage caused by corrosive chemicals on bench-tops, tabletops, fume hoods, work surfaces around microscopes and microtomes, etc.

Temperature Range
BYTAC Bench & Shelf Protector with vinyl backing is for general purpose applications ranging in temperature up to 93°C (200°F).

For higher temperature applications from 93°C (200°F) to 182°C (360°F), we recommend using only BYTAC Bench & Shelf Protector with aluminum backing.

Easy to Clean
The release and clean-up characteristics of BYTAC® are excellent. Practically nothing sticks to its surface. Clean-up of chemicals, paint, oil, grease and sticky foods is as easy as wiping with a damp sponge or towel. BYTAC's PTFE surface is resistant to virtually all chemicals which makes it ideal for use with toxic or radioactive materials. Its completely non-absorbing characteristic makes it ideal for use as a substrate for applications ranging from oil painting, cooking, all the way to serving as a "mat" for hazardous chemical drums.

Easy to Replace
Should you want to remove or replace any BYTAC® material already in place, just peel it off. It comes off all surfaces easily and cleanly.

Applications
BYTAC® Bench & Shelf Protector provides a protective layer that resists corrosive chemicals and solves sticking or clean-up problems in plants, laboratories, food-processing plants, and home workshops.

Typical Uses Include

  • Benchtops
  • Microscope work surfaces (protection from solvents)
  • Microtome and ultramicrotome work surfaces (protection from solvents and even osmium reactions)
  • Fume hood lines
  • Acid storage cabinet liners
  • Chemical storage cabinet liners
  • Roll covers
  • Mold liners
  • Stopped liners
  • Spray booths
  • Clean rooms
  • Chute liners
  • Packaging machines