Keylajet - Low-foaming high alkaline liquid, 5 Gallon Can

Keylajet - Low-foaming high alkaline liquid, 5 Gallon Can
Keylajet - Low-foaming high alkaline liquid, 5 Gallon Can
$481.28
AvailabilityContact for Availability
Item01103-AB

Low-foaming chelating alkaline detergent

  • Corrosion inhibited formula
  • Caustic liquid detergent with chelators
  • Free rinsing to give you reliable results and no interfering residues
  • For tough-to-clean residues on hard surface

Used to Clean: Manufacturing equipment, cosmetics residues, injection molds, fouled metal parts in maintenance and repair operations from marinas to automotive to aerospace to oil & gas, such as filters, fins, exchangers, pump heads, steel engine blocks, exhaust systems, and more; metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Use to clean steel prior to passivation.

Used to Remove: Hard to clean soils, grit, grime, slime, grease, buffing compounds, oils, particulates, deposits, chemical and solvents, mold releases, metal oxides, and much more.

Surfaces Cleaned: Corrosion inhibited formulation recommended for hard metals, steels, stainless steel, porcelain, ceramic, rigid plastics, cement, and elastomers. Do not use on soft metals such as copper, aluminum, zinc and magnesium.

Cleaning Method: Soak, spray, brush, sponge, cloth, ultrasonic, flow through clean-in-place, agitation, or automated washing. Please ensure gasket compatibility.

Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in warm or hot water. For difficult soils or to remove metal oxides, raise water temperature and use more detergent, up to 10% by volume. Clean by soak, circulate, wipe, spray, or ultrasonic method. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Corrosion testing may be advisable for high-carbon steels and may require rust preventative application post-cleaning.

PHYSICAL DATA  Typical Value
pH (as is): 13+
Specific gravity:(g/ml)  1.3
Density: (lbs./gal.)  10.8
Flash Point:(degrees F–open cup) None
Phosphate Content:(as Phosphorus)  1.0%
Organic Carbon (% calculated w/w) 2.8%
Fragrance and Dye Content: 0%
Surface Tension 1% Sol'n (Dyne/cm):  33
Appearance and Color: Pale yellow liquid
Solubility in Water: Soluble in all proportions
Biodegradability: Biodegradable
Foam Tendency: Low Foaming
Shelf Life: Two years from date of manufacture
Documents