SPI Supplies Brand Pure Virgin PTFE Jar

SPI Supplies Brand Pure Virgin PTFE Jar, 15 ml
Size 15 ml
Item02033-AB
AvailabilityIn Stock
$42.17
SPI Supplies Brand Pure Virgin PTFE Jar, 30 ml
Size 30 ml
Item02034-AB
AvailabilityIn Stock
$55.02
SPI Supplies Brand Pure Virgin PTFE Jar, 60 ml
Size 60 ml
Item02035-AB
AvailabilityIn Stock
$65.46
SPI Supplies Brand Pure Virgin PTFE Jar, 120 ml
Size 120 ml
Item02036-AB
AvailabilityIn Stock
$90.32
SPI Supplies Brand Pure Virgin PTFE Jar, 240 ml
Size 240 ml
Item02037-AB
AvailabilityIn Stock
$117.81
SPI Supplies Brand Pure Virgin PTFE Jar, 360 ml
Size 360 ml
Item02038-AB
AvailabilityIn Stock
$169.19
SPI Supplies Brand Pure Virgin PTFE Jar, 480 ml
Size 480 ml
Item02039-AB
AvailabilityIn Stock
$190.13
SPI Supplies Brand Pure Virgin PTFE Jar, 1000 ml
Size 1000 ml
Item02041-AB
AvailabilityIn Stock
$301.06
SPI Supplies Brand Pure Virgin PTFE Jar, 2200 ml
Size 2200 ml
Item02042-AB
AvailabilityIn Stock
$589.01

All SPI Supplies Brand PTFE jars are chemically inert, non-contaminating, and are thermally stable in the range of -200°C (390°F) to + 280°C (+536°F). The jars also have a "super smooth" finish making it virtually impossible for anything to "stick" to the surface of these fine laboratory products. Suitable for IPA Method 1311 TCLP.

VolumeHeightOutside Body DiameterCap Diameter
02033-AB15 ml34 mm30 mm34 mm
02034-AB30 ml62 mm32 mm34 mm
02035-AB60 ml46 mm55 mm60 mm
02036-AB120 ml62 mm62 mm72 mm
02037-AB240 ml100 mm65 mm72 mm
02038-AB360 ml95 mm80 mm90 mm
02039-AB480 ml125 mm80 mm90 mm
02041-AB1000 ml160 mm102 mm110 mm
02042-AB2200 ml260 mm120 mm134 mm

Details of the manufacturing:
The bottles are isostatically molded from pure virgin PTFE resulting in a highly inert material, with very heavy wall construction, one that will stand up to nearly everything one might want to put into it. The super smooth internal finish means that virtually nothing will really stick to it. The base is precision machined for good heat transfer on a hot plate.

Cautions about over heating:
PTFE jars can not be taken to temperatures as high as glass. The user has to be sure they do not overheat PTFE jars. If PTFE is overheated, especially in air, it can start to break down by both thermal decomposition and oxidation, resulting in fumes of HF which should not be inhaled under any circumstances.

Use in connection with food:
Isostatically molded in pure, FDA approved, PTFE

Important Safety Notice:
Do not use when sealed for chemical reactions or digestions. Loosen lid when thermally sterilizing.