SPI Supplies^® Brand ITO Coated Glass Plates

Use our standard size glass plates to be cut up to your own desired custom sizes

Introduction:
SPI Supplies has long offered a product line of ITO coated glass and plastic microscope slides in different ITO coating thicknesses (e.g. resistivities).

Some customers have needs for varying sizes of ITO coated glass and consequently we offer large coated glass plates in a standard stock size.

Coating thickness:
One should select the coating thickness on the basis of the desired coating resistivity. One can select the appropriate coating from our conversion chart that relates coating thickness to resistivity.

Cutting down larger coated pieces to smaller sizes:
Some of our customers are at times tempted to purchase a large piece of ITO-coated glass, with the idea of scribing and then breaking down the glass to smaller sizes. Life should only be that simple! Unfortunately, when this is done, there is sufficient disruption to the ITO coating at the edges that it is never a good result. We always advise cutting the glass down to the desired size and then coat the cut pieces. This does result in additional handling, and higher costs but one is assured of a much higher quality result.

Standard dimensions:
300 mm x 300 mm x 1 mm thick

Resistivity, ohms per:	SPI #	Each	10+, Each	In Stock
70 - 100	06458-AB	$ 154.32	$ 138.89	Yes
30 - 60	06459-AB	169.26	152.33	Yes
15 - 30	06460-AB	202.88	182.59	Yes
10 - 15	06461-AB	219.95	197.96	Yes

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Tuesday February 09, 2010 © Copyright 2010. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo

SPI Supplies® Brand ITO Coated Glass Plates

SPI Supplies^® Brand ITO Coated Glass Plates