Brayco 1724 Oil

 
Brayco 1724 Oil 4 pounds (1 quart)
Size 4 lbs (1 Quart)
Item06021-AB
AvailabilityItem Not Available
 
Brayco 1724 Oil 75 pound pail
Size 75 lb Pail
Item06021B-AB
AvailabilityItem Not Available

Brayco 1724 Oil 4 pounds

Castrol Brayco 1720 Series Oils are clear, colorless low molecular weight perfluoroether oils. The oils are chemically inert to virtually all chemicals, and safe to use in direct contact with oxidants such as LOX/GOX and chlorine. Brayco 1720 Series Oils are nonflammable and non-toxic. Castrol Fluoroclean™ X100 and Castrol Fluoroclean™ HE can be used to remove these lubricants. Refer to the data sheets for information regarding these products.

Applications

Brayco 1720 Series Oils are intended for use as gear, pump, and lubricating oils where direct or indirect contact with aggressive chemicals, oxidants, and low temperatures are routine. The Brayco 1720 Series Oils can also be used as vacuum pump oils in operations requiring vapor pressures as low as 10-4 torr. Perfluorinated fluids, in general, exhibit excellent shelf lives due to their intrinsic inertness.

Characteristics

 

TEST METHOD DESCRIPTION RESULT
1721 1722 1723 1724
D 287 Specific Gravity @ 16/16°C (60/60°F) 1.848 1.885 1.887 1.907
  Pounds per Gallon @ 16°C/60°F 15.40 15.70 15.72 15.89
D 445 Kinematic Viscosity, cSt
@ 100°C (212°F)
@ 40°C (104°F)
@ 20°C (68°F))
@ 0°C (32°F)
@ -20°C (-4°F)
@ -40°C (-40°F)
@ -54°C (-65°F)

1.43
5.1
10.3
22
90
2500
60,000

4.04
21.8
56.4
240
1600
18,000
250,000

5.19
30.1
79.1
310
2100
30,000
ND

9.46
67.7
198.1
800
7000
ND
ND
D 2270 Viscosity Index ND 60 101 114
D 97 Evaporation Loss, % wt
22 hrs @ 60°C (140°F)
22 hrs @ 120°C (248°F)

6.33
---

1.39
18.0

1.6
26.2

0.7
9.3
D 2266 Four-Ball Wear-Test, AWSD, mm
600 rpm, 2 hrs, 75°C (167°F), 40 kgf

0.59

0.55

0.52

0.42
D 2783 Four-Ball EP Weld Point
Weld Point, kgf
Load Wear Index

250
50

250
75

315
85

315
115
Knudsen Vapor Pressure, torr
20°C (68°F)
100°C (212°F))

1 x 10-1
1 x 10-1

1 x 10-3
1 x 10-1

1 x 10-3
1 x 10-1

1 x 10-4
1 x 10-2
D 1331 Surface Tension
20°C (68°F), dynes/cm

19

21

21

21
D 2512 LOX Impact Sensitivity
20 drops, 1100 mm

Pass

Pass

Pass

Pass

Temperature Range:

Brayco 1721 -54°C to 93°C (-65°F to 200°F)
Brayco 1722 -34°C to 149°C (-30°F to 300°F)
Brayco 1723 -34°C to 163°C (-30°F to 325°F)
Brayco 1724 -29°C to 177°C (-20°F to 350°F)

Limitations:

Brayco 1720 Series Oils are compatible with all commonly utilized materials, plastics, and elastomers. Brayco 1720 Series Oils may be adversely affected by Lewis Acid Catalysts such as AlC13, at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium and titanium may react with Brayco 1720 Series Oils under certain conditions. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to oil application to insure proper lubrication.

Removal of unwanted grease from grease applied surfaces:

The composition of this product is a mixture of small PTFE particles (which won't dissolve in anything) and a perfluorinated polyether liquid. We have found that Castrol® Fluoroclean™ HE is an effective solvent for the liquid component of the formulated composition and aids in the removal of the grease from places where it is no longer needed or wanted.

Packaging:

Brayco 1720 Series Oils are available in 16 pounds (1gallon) bottles and 75-pound pails.