Castrol Braycote 1726 Plus High Viscosity Oil, 16lbs (1 Gallon) bottle

Castrol Braycote 1726 Plus High Viscosity Oil, 16lbs (1 Gallon) bottle
Castrol Braycote 1726 Plus High Viscosity Oil, 16lbs (1 Gallon) bottle
$4,296.25
AvailabilityIn Stock
Item05199-AB

Castrol® Braycote® 1726 Plus High Viscosity Oil, 16lbs (1 gallon) Bottle:

Castrol Brayco 1726 & 1727 Plus High Viscosity Oils are clear, colorless low molecular weight perfluoroether oil with added corrosion preventive. These oils are chemically inert to virtually all chemicals, and safe to use in direct contact with oxidants such as LOX/GOX and chlorine. They are nonflammable and non-toxic. Brayco 1726 meets the requirements of ISO 150 and Brayco 1727 meets the requirements of ISO 220. Castrol Fluoroclean? X100 or Castrol Fluoroclean™ HE can be used to clean these products. Refer to the data sheets for Fluoroclean X100 and Fluoroclean HE for more information regarding these products.

Applications

Brayco 1726 & 1727 Plus High Viscosity Oils are intended for use as gear, pump, and lubricating oils where direct or indirect contact with aggressive chemicals, oxidants, and where low temperatures are routine. These oils can also be used as vacuum pump oils in operations requiring vapor pressures as low as 10-4 torr. Both oils offer special corrosion protection to iron, copper and a variety of metals. Perfluorinated fluids, in general, exhibit excellent shelf lives due to their intrinsic inertness.

Characteristics

 

TEST METHODDESCRIPTIONBRAYCO 1726BRAYCO 1727
  ISO Grade 150 220
D 287 Specific Gravity @ 16/16°C (60/60°F), gm/ml 1.9 1.91
Table 8 Pounds per Gallon 15.85 15.93
D 445 Kinematic Viscosity, cSt
@ 100°C (212°F)
@ 40°C (104°F)
@ 25°C (77°F)
@ -40°C (-40°F)
16.6
141.5
347.7
>1,000,000
24.3
224.6
526.5
>1,000,000
D 2270 Viscosity Index 132 135
D 97 Pour Point, °C (°F) -36 (-33) -30 (-22)
D 972 Evaporation Loss, % wt
22 hrs @ 60°C (140°F)
22 hrs @ 120°C (248°F)

0.95
6.5

0.78
5.4
D 2266 Four-Ball Wear-Test, AWSD, mm
600 rpm, 2 hrs, 75?C (167?F), 40 kgf
0.56 0.59
D 2783 Four-Ball EP Weld Point
Weld Point, kgf
Load Wear Index
310
81
310
87
D 2879 Vapor Pressure, torr
100°C (212°F)
20°C (68°F)
1.8
0.05
0.5
0.04
D 1331 Surface Tension
20°C (68°F), dynes/cm
23.5 23
D 2512 LOX Impact Sensitivity
20 drops, 1100 mm
Pass Pass

 

Temperature Range:

-29°C to 177°C (-20°F to 350°F)

Limitations:

Brayco 1726 & 1727 Plus High Viscosity Oils are compatible with all commonly utilized materials, plastics, and elastomers. These oils may be adversely affected by Lewis Acid Catalysts, such as AlC13, at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium and titanium may react these products under certain conditions. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to oil application to insure proper lubrication. These products are not recommended for use in applications under high vacuum and loads exceeding 100,000 psi for extended periods of time.

Packaging:

Brayco 1726 Plus High Viscosity Oil is available in 16 pound (1 gallon) bottles and Brayco 1727 is available in 16 pound (1 gallon) bottles and 75 pound pails.