Welcome Guest
Shopping Cart
Your cart is empty
SPI Supplies Conductive Silver Epoxy Kit, 2.5g each pack
SPI Supplies Conductive Silver Epoxy Kit, 2.5g each pack
Click to enlarge

SPI Supplies Conductive Silver Epoxy Kit, 2.5g each pack

Item Number 05062-AB
Availability Contact for Availability
Quantity Price/EACH
1 to 9 $76.50
10 and up $68.85

SPI Supplies® Conductive Silver Epoxy Kit, 2.5g each pack

A complete set of easy to follow application and mixing instructions accompanies each kit. Mix by kneading. A well mixed system seems to be quite stable in ordinary SEM vacuum and there have been reports of use in UHV systems, provided the two components are very well mixed during preparation. One important characteristic of the product is the ability to reproduce within fairly narrow limits theproperties of the cured adhesive. The 2.5g amount per pouch is the minimum amount needed to ensure uniform mixing of the epoxy components.

This product replaces 05067-AB as of 11/17/2011.

This two part silver epoxy is an electrically conductive silver filled epoxy adhesive recommended for a wide range of electronic bonding and sealing applications that require a combination of good mechanical and electrical properties. This two part smooth paste formulation of refined pure silver and epoxy is free of solvents and copper or carbon additives. It develops strong bonds and coating between many different and dissimilar materials such as metals, ceramics, glass and plastic laminates. SPI # 05062 Two Part Silver Epoxy cures at room temperature and can be used as a "cold solder" for heat sensitive components where hot soldering is impractical. It also can be used for the assembly and repair of electrical modules, printed circuit boards, wave guides, flat cable and high frequency shields. This adhesive complies with the requirements of NASA's Outgassing Specification. There are also several important applications for the typical SEM laboratory. For example, this special silver filled epoxy is perfect for fastening down a sputter coater cathode to the head. And it is the ideal adhesive, when strength is really needed, for mounting a valuable or heavy sample onto a small (in comparison) SEM mount prior to analysis. 

Packaging:
2.5 g single use pouches