SPI Supplies is the source!

Braycote® Micronic 600EF Vacuum Grease

Product Data Sheet


Description:
Castrol Braycote® Micronic 600EF is a smooth, buttery, translucent off-while colored NLGI #2 grease. Castrol Braycote® Micronic 600EF uses Castrol Brayco® 815Z as the base fluid and a tetrafluoroethylene telomer as the gelling agent. This grease is nonflammable, chemically inert and thermally stable and does not use any chlorofluorocarbons (CFC's) during product manufacture. It has exceptionally low volatility and has little tendency to form deposits. It has excellent lubricating properties, good shear stability and low acute toxicity. Castrol Fluoroclean™ X100 or Castrol Fluoroclean™ HE can be used to remove this lubricant. Refer to the data sheets for Castrol Fluoroclean™ X100 and Castrol Fluoroclean™ HE for information regarding these products.

Temperature Range:
-80°C TO 204°C (-112°F TO 400°F)

Uses:
Braycote® Micronic 600EF is designed to operate in the presence of fuels, oxidizers, and in applications of deep space vacuum. It is used in gears, ball and roller bearings, electrical contacts, and "O" rings. This grease is highly recommended for applications where temperature extremes and/or low vacuums are routine, such as cryogenic coolers, FLIR., laser optical systems, or hostile chemical environments. Perfluorinated greases, such as Castrol Braycote® Micronic 600EF exhibit excellent shelf life due to their intrinsic inertness.

Limitations:
Castrol Braycote® Micronic 600EF is compatible with most commonly utilized materials, plastics and elastomers. Castrol Braycote® Micronic 600EF may be adversely affected by Lewis Acid Catalysts, such as aluminum chloride at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium, and titanium alloys may react with Braycote® Micronic 600EF under certain conditions. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to grease application to insure proper lubrication. This product is not recommended for use in applications under high vacuum with loads exceeding 100,000 psi for extended periods of time.

Packaging:
Castrol Braycote® Micronic 600EF is packaged in 2 oz (AVDP) disposable polypropylene syringes and 1 pound jars by Castrol and some is repackaged by SPI Supplies into 10g syringes.



Technical Data Sheet
Braycote® 600EF

TEST
METHOD		 DESCRIPTION RESULT
D 1403 Penetration, (77°F), mm-1
Unworked
Worked, 60 strokes
288
288
FTM 321 Oil Separation, 30 hrs, 204°C (400°F), %wt
Evaporation Loss, % wt
11.83
0.20
FTM 5309 Copper Strip Corrosion, 24 hrs, 100°C (212°F) 1b
D 2265 Dropping Point, °C (°F) 214(414)
D 2266 Four-Ball Wear-Test, AWSD, mm
1200 rpm, 40 kgf, 1 hr, 75°C (167°F)
1200 rpm, 40 kgf, 1 hr, 204°C (400°F)
0.91
1.29
D 2596 Four-Ball Extreme-Pressure Weld Point, kgf 700+
E 595
NASA
SP-R-0022A		 Vacuum Stability Test 24 hrs, 125°C (257°F), 10-6, torr
Total Weight Loss(TWL), % wt
Volatile Condensable Material(VCM), % wt

0.20
0.03
D 1478
Low-Temperature Torque, g.cm
@ -62°C (-80°F)
Starting
Running, 1 hr
@ -73°C (-100°F)
Starting
Running, 1 hr

585
228

1430
637
D 2512
(MSFC 106)		 LOX Impact Sensitivity
20 drops, 100 mm
Pass
D 3336 High Temperature Bearing Performance, hrs 586+
Outgassing test Total Mass Loss, 48 hours @ 150°C, ~10-9torr, % wt. 0.04
E 1559 Extrapolated Vapor Pressure, torr, derived from ASTM
vapor pressure versus temperature plot. Refer to the attached plot.
Samples preconditioned at 150°C for 48 hours.
@60°C(140°F)
@100°C(212°F)
@150°C(302°F)


7x10-12
6x10-10
4x10-8
1420 Pounds per gallon @ 16°C (60°F)
Grams per milliliter @ 16°C (60°F)		 15.70
1.88
Base Oil Chacacteristics
D 287 Specific Gravity @ 16/16°C (60/60°F)
Pounds per gallon @ 16°C (60°F)		 1.8531
15.430
D 445 Kinematic Viscosity, cSt
@ 99°C (210°F)
@ 38°C (100°F)
@ -54°C (-65°F)
45
148
10,855
D 2270 Viscosity Index 350
D 97 Pour Point, °C (°F)
-72 (-100)
Knudsen Vapor Pressure, torr
@ 20°C (68°F)
@ 100°C (212°F)
@ 200°C (392°F)
4 x 10-13
2 x 10-9
2 x 10-6

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:
Tuesday January 06, 2009
© Copyright 2009. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo