For those most delicate of parts be they on an electron microscope or any
other precision piece of equipment. These are the screw driver sets
preferred by the finest watch makers in the world.
These fine Swiss-made jeweler's screwdrivers have small, sturdy blades,
selected to cover the range of requirements for the microscopy laboratory
environment. All handles are color-matched with specific slots in the
revolving stand for easy blade reinsertion and reference and storage
between use. The complete sets come with one spare blades per size. Both
versions of this product come with an adherent rubber base plate for surface
stability, even on a slightly tilted work surface. All screw drivers are
chrome plated.
Standard set:
Designed for the more economy minded, the base is 65 mm diameter and there
is a space in the base where the spare blades can be stored (but not in
individual compartments).
De Luxe set:
Designed for the more professional worker, the rotating stand is 90 mm
diameter and is a far more precision made product. For each screw driver
size, there is a special reservoir for spare blades of that particular size
for more convenient blade replacement. The entire base is chrome plated for
protection against laboratory solvents. The base is weighted for added
stability.
Standard Screw Driver Set:
Number of screw drivers: 9
Length of edge of blades: 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 2.0 , 2.5, 3.0 mm
De Luxe Screw Driver Set:
Number of screw drivers: 10
Length of edge of blades: 0.5, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 2.0, 2.5, 3.0 mm
Replacement Code on the carousel holder: 50, 60, 80, 100, 120, 140, 160, 200, 250, 300
|
To Ask a Question or Make a Comment