Space Saver™ Vacuum Desiccators

Our most economical storage system

"Space Saver" Vacuum Desiccator in Three Sizes

Shatterproof, yet light and strong, these desiccators will hold a vacuum of 740 mm of Hg for 24 hours. The clear polycarbonate top has added strength to eliminate danger of implosion under vacuum, and the polypropylene lower section provides excellent chemical resistance. A PTFE plug turns easily to allow controlled entrance of air and a Neoprene^® "O" ring seal requires no grease. The perforated plate is 3.2mm in diameter and is made from polypropylene.

Desiccant needed:
The three Space Saver Vacuum Desiccators, for them to operate in the "drying" or "desiccating" mode, require an appropriate desiccant. We are talking about the situation where the chamber is being used without vacuum and only as a desiccating volume. In such a case, we would recommend either SPI-Dry™ Basic Desiccating Canister or the SPI Desiccant Capsules. This is a far superior approach than the one where some powder desiccant material is placed in the bottom of several petri dishes since the powder has more than a passing chance of powder-contaminating the samples being stored.

Techni-Dome® Large Size Vacuum Desiccator now available:
We can now offer the super jumbo Techni-Dome large size vacuum desiccator. This is the first time one has made a vacuum desiccator of this size. It is maintenance free and reasonably priced.

	SPI #	Each	In Stock
Small
17.1cm high x 14.9cm diameter(6 ³/₄" x 5 ⁷/₈")	01922-AB	$61.36	Yes
Medium
26.5cm high x 19.7cm diameter(10.5" x 7.75")	01822-AB	81.81	Yes
Large
31.1cm high x 24.1cm diameter(12.25" x 9.5")	01823-AB	111.61	No
Techni-Dome® Large Size Vacuum Desiccator
Complete unit with one shelf	01620-AB	677.86	Yes
Before ordering the Techni-Dome^®, check the available accessories.

For use with any of the vacuum desiccators on this page, we suggest the Gast Vacuum Pump.

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Tuesday February 09, 2010 © Copyright 1998 - 2010. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo