SPI Supplies® Brand Indium-Tin-Oxide (ITO) Coated Microscope Slides
Choose from a variety of resistivities for a range of applications for heating
Useful additional information first:
Is it easy to tell which side of the slide has the coating? This is one of
the most often-asked questions of those who are first-time purchasers of the
coated slides.
There are actually two ways, but the easiest to tell if the side has been
coated is to hold it up to the light. There should be a purple tint which
can be seen right to the very edge of the glass. If you can only see it part
way to the edge, the ITO coating is the other side.
Of course, the "acid test" is to attach a multimeter to one of the sides.
There will be no reading if there is no coating. And of course, there will
be a reading if it is the side with the coating.
For the selection of the "right" ITO-coated microscope slide product, the
selection process includes the following steps:
How to select the right slide for you:
Microscope slide products:
Available "standard" ITO coated one side
Available "standard" ITO coated with index matching coating with busbar
Available "standard" ITO coated with index matching and antireflective coatings with busbar
- Float glass unpolished in 1.1 mm thickness
- Float glass polished in 0.7 mm thickness
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
Return to:
Tuesday January 06, 2009
© Copyright 2009. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy
Worldwide Distributors, Representatives, and Agents
