Koldmount™ Fast Curing Cold Mounting Kit
Use instructions
While there are undoubtedly some number of variations on this protocol, we
believe the one indicated below is a good starting point for anyone trying
to determine the optimum potting conditions:
Mixing:
Mix 2 parts of powder to 1 part of liquid by volume for not less than 30
seconds. Pour the mixture completely over the specimen which is already
placed in mounting ring, itself resting on a glass or stainless steel plate
(e.g. flat surface).
Curing:
Allow to stand at least 20 minutes at room temperature 24 to 27° C (75 to
80° F) until KoldMount hardens, after which final preparation of specimen
can be started. Note: Colder temperatures retard the hardening action. If
laboratory is 21°C (70°F) it may take 30 minutes to cure; If 18° C (65° F)
perhaps as long as 40 minutes could be required.
Metallographically polishing and etching:
Use whatever standard protocols you would have used for other potting resins.
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
Return to:
Wednesday February 08, 2012
© Copyright 2002 - 2012. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy
Worldwide Distributors, Representatives, and Agents
