AFM Probe Tips

Model #HART3 - High Aspect Ratio Probe Tips - 3° Tilt Compensation

Introduction:
The HART3 high aspect ratio probe tips with 3º degree tilt compensation are designed to fit in all manual and automated AFMs. The probes are made out of heavily doped single crystal silicon. The spike is conical in shape. This style is available in four different stock configurations.

Specifications:

	Parameter	Typical Value	Range
Cantilever	Thickness (µm)	4	3.5 - 4.5
	Width (µm)	40	35 - 45
	Length (µm)	125	115 - 140
	Resonant Frequency (kHz)	300	200 - 400
	Spring Constant (N/m)	40	25 - 75
Tip	Height (µm)	14	12 - 16
Tip	Radius (nm)	10	Less than 10 nm
Spike Tilt	3 Degree
Coating	None

Available products:

HART3-1 Spike: Lenth 0.5 µm x Width 30 nm
Uncoated (no aluminum coating)
# Per Pack	SPI #	Each Pack	In Stock
5	HART315-AB	658.28	No

HART3-2 Spike: Lenth 2.0 µm x Width 100 nm
Uncoated (no aluminum coating)
# Per Pack	SPI #	Each Pack	In Stock
5	HART325-AB	677.37	No

HART3-4 Spike: Lenth 4.0 µm x Width 200 nm
# Per Pack	SPI #	Each Pack	In Stock
50	HART345-AB	724.61	No

HART3-6 Spike: Lenth 6.0 µm x Width 400 nm Uncoated (no aluminum coating)
# Per Pack	SPI #	Each Pack	In Stock
5	HART365-AB	758.78	No

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Saturday March 20, 2010 © Copyright 2010. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo