SPI Easy Molds™ for Plastic Embedding

You can use the molds over again so the price per use is very attractive

These have to be the most innovatively designed embedding molds we have ever seen. They are convenient because they are self-standing and do not need a capsule rack to hold upright. And they are economical since they can usually be reused at least another one or two times because of the "push out" nature of the mold base.

You just can not beat these molds for convenience for plastic embedding for TEM or LM. The Easy Molds are available in two convenient sizes:

Small:
SPI #02303-AB Consists of two sets of 10 molds each (for total of 20 cavities) of 5.6 mm diameter, corresponding to a BEEM^® Size 3 embedding capsule. Overall dimensions of each unit: 87 x 66 mm in lateral dimensions x 16 mm high.

Large:
SPI #02304-AB Consists of two sets of 10 molds each (for a total of 20 cavities) of 8 mm diameter, corresponding to a BEEM^® Size 00 or the SPI Micromould™.

Select from two different capsule sizes


		SPI #
	Small 5.6 mm	02303-AB
	Large 8.0 mm	02304-AB

Easy Mold™ Embedding Molds Small
	SPI #	Each	In Stock
Pack of 5 trays (20 cavities per tray)	02303-AF	$ 25.26	Yes
25 trays (20 cavities per tray)	02303-CF	106.51	Yes
50 trays (20 cavities per tray)	02303-FA	192.15	Yes

Easy Mold™ Embedding Molds Large
Pack of 5 trays (20 cavities per tray)	02304-AF	25.26	Yes
25 trays (20 cavities per tray)	02304-CF	106.51	No
50 trays (20 cavities per tray)	02304-FA	192.15	No

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Tuesday May 13, 2008 © Copyright 1995 - 2008. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo