SPI-Chem™ Conductive Copper-Filled Diallyl Phthalate

Improve the inherent conductivity of the finished metallographic mount

The SPI-Chem™ Conductive Copper-Filled Diallyl Phthalate is ideal for electron beam instrument applications. It can be cured to a very hard mount, exhibiting good chemical resistance, if needed for electropolishing. The samples will resist rounding during mechanical polishing, of course such rounding is nearly impossible to prevent, at least slightly. The over all mounting procedure is similar to that used for Bakelite, Electropolish and replicate, samples will not round during mechanical polishing. Mounting procedure is the same as Bakelite™, since this is also a thermoset resin system.

Curing information:
Recommended cure conditions: 270 to 300°F (132 to 149°C) at 4200 psi for 8 minutes for a 1 inch (25.4 mm) round mold. The cure time is a function of the size of the mount being made, for example, for a 1.25" (32 mm) mount, use ten minutes.

Package sizes:
Standard packaging is in 1 pound (0.45 kg) and 5 pound (2.27 kg) bottles.

Shelf life:
Nothing is forever but we have never had reported to us by any customer that the material has ever gone "bad" and we have offered this product since 1975. So we believe its shelf-life is quite long indeed.

Copper-filled diallyl phthalate powder MSDS

Quantity	SPI #	Price	In Stock
1 lb. (0.45 kg)	01362-AB	$ 108.24	Yes
5 lb. (2.27 kg)	01362-AF	414.87	No

Storage conditions: Room temperature
Non-hazardous from stand point of shipping

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Friday July 04, 2008 © Copyright 2001 - 2008. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo