For Embedding specimens - an advanced formula cold mounting resin which
dries clear and very hard overnight. Most users will need some epoxy mold
release agent as well. Of the various alternatives, this resin cures
almost clear and certainly cures to the clearest block of the various
metallographic type resins. Another advantages is that this particular
resin system does not require a mounting press as do the thermosets.
What can be "potted" up:
Just about any metal or ceramic piece can be mounted and polished this way
using this embedding system. It can also be used with certain plastics that
would otherwise melt (or be annealed and changed) if traditional mounting
materials were used. It is also used by those mounting wood samples.
|
|
To Ask a Question or Make a Comment