Write-On™ Laboratory Label Tape and Supplies

Laboratory label tape that adheres to nearly any surface!

Introduction:
Write-On™ Label Tape adheres to any surface, including Teflon^® PTFE fluoropolymer resin coated materials, and peels off without leaving a sticky residue. Pencil, ball-point pen or solvent ink marker remain legible under the most demanding laboratory conditions. The tape consists of colored Kraft paper with a rubber resin adhesive that resists moisture and most commonly used laboratory solvents. The tape will withstand broad temperature and environmental extremes; from a steam autoclaving cycle at 121°C (250°F) down to -73°C (-99°F). All rolls fit on standard 76mm (3") cores.

Write-On™ Label Tape Dispenser:
The Write-On™ tape dispensers make labeling easy and fast. Multiple colors and widths of labeling tape are readily positioned on a platform that provides a smooth surface for writing on each tape. When a tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the writing platform. A variety of labeling tape widths from 12 - 25mm (1/2 - 1") can be mixed together on the spindles which can easily accommodate 5 or more narrow rolls 12 - 19mm (1/2 - 3/4") or 4 wider rolls 25mm (1"). The spindles are easily removed from the unit for loading and unloading tape and can be adjusted to hold either 25 or 75mm (1 or 3") core diameter rolls. Included with each dispenser are three plastic separating discs, which when placed between the rolls assure smooth, snag free dispensing for up to four rolls of tape. Additional separating discs can be purchased if more than four rolls of tape are to be used. Molded-in pen holder wells on the dispenser help to keep writing instruments handy. Ideal for use with the full line of Write-On™ Tapes which are available in 6 colors and three widths, 12, 19, and 25mm (1/2, 3/4 and 1").

Two dispenser models are available:
1] The Write-On™ Benchtop Tape Dispenser (US Patent 6,974,060) patent applied for) has a plastic coated, weighted steel base with rubber feet to prevent slipping on the benchtop when pulling the labeling tape. The serrated cutting edge is steel for long term use. Each dispenser is shipped with one "starter" roll of Write-On labeling tape, the colors are selected at random and we can not honor requests for a specific color.
2] The Economy Write-On™ Tape Dispenser is designed for lighter duty use as the plastic cutting edge is molded into the housing. There are a series of mounting holes in the unit for secure attachment with screws (not supplied) to the benchtop. For a space saving alternative, this dispenser can also be attached to many vertical surfaces. Each dispenser is shipped with one "starter" roll of Write-On labeling tape, the colors are selected at random and we can not honor requests for a specific color.

Available tapes:

Core	Width	Yards	Color	SPI #	Price	In Stock
1"	12.7mm(1/2")	15	white	F134620005-AB	$ 4.00	No
1"	25.4mm(1")	15	white	F134620010-AB	5.50	No
1"	19.0mm(3/4")	15	white	F134620075-AB	4.50	No
1"	19.0mm(3/4")	15	white, yellow, green 3-pack	F134620300-AB	12.25	No
1"	12.7mm(1/2"	15	yellow	F134622005-AB	4.00	No
1"	25.4mm(1)	15	yellow	F134622010-AB	5.50	No
1"	19.0mm(3/4")	15	yellow	F134622075-AB	4.50	No
1"	12.7mm(1/2")	15	green	F134623005-AB	4.00	No
1"	25.4mm(1")	15	green	F134623010-AB	5.50	No
1"	19.0mm(3/4")	15	green	F134623075-AB	4.50	No
3"	12.7mm(1/2")	40	white	F134630005-AB	7.75	No
3"	25.4mm(1")	40	white	F134630010-AB	12.75	No
3"	19.0mm(3/4")	40	white	F134630075-AB	10.25	No
3"	12.7mm(1/2")	60	white	F134630105-AB	10.25	No
3"	25.4mm(1")	60	white	F134630110-AB	15.75	No
3"	19.0mm(3/4")	60	white	F134630175-AB	12.50	No
3"	19.0mm(3/4")	15	all colors 6-pack	F134630600-AB	56.75	No
3"	12.7mm(1/2")	40	red	F134631005-AB	8.00	No
3"	25.4mm(1")	40	red	F134631010-AB	13.50	Yes
3"	19.0mm(3/4")	40	red	F134631075-AB	10.75	No
3"	12.7mm(1/2")	40	yellow	F134632005-AB	8.00	No
3"	25.4mm(1")	40	yellow	F134632010-AB	13.50	No
3"	19.0mm(3/4")	40	yellow	F134632075-AB	10.75	No
3"	12.7mm(1/2")	40	green	F134633005-AB	8.00	No
3"	25.4mm(1")	40	green	F134633010-AB	13.50	Yes
3"	19.0mm(3/4")	40	green	F134633075-AB	10.75	No
3"	12.7mm(1/2")	40	blue	F134634005-AB	8.00	No
3"	25.4mm(1")	40	blue	F134634010-AB	13.50	Yes
3"	19.0mm(3/4")	40	blue	F134634075-AB	10.75	No
3"	12.7mm(1/2")	40	orange	F134635005-AB	8.00	No
3"	25.4mm(1")	40	orange	F134635010-AB	13.50	Yes
3"	19.0mm(3/4")	40	orange	F134635075-AB	10.75	No

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Wednesday July 09, 2008 © Copyright 1998 - 2008. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.

Worldwide Distributors, Representatives, and Agents Flag logo