SPI Supplies Division|
|
Date Effective........... February 17, 2007
(most recent revision)
Chemical Name/Synonyms.. Not known
Chemical Family......... Not known
Emergencies Contacting CHEMTREC 24 Hour Emergency
Use Only #'s.... Worldwide phone : 1-(703)-527-3887
Worldwide FAX : 1-(703)-741-6090
Toll-free phone : 1-(800)-424-9300
(USA only)
Product or Trade Name.... SantoLight™ Optical Fluids SL-5267
CAS #.................... None
Chemical Formula......... Not known
Product formulation is proprietary. No ingredients are known to be hazardous under normal use. This product is not a hazardous chemical(s) under the criteria of the OSHA Hazard Communication Standard (29 CFR 1910.1200).
EFFECTS OF SINGLE OVEREXPOSURE: SWALLOWING: Small amounts transferred to the mouth by fingers during use, etc., should not injure. Swallowing large amounts may cause digestive discomfort. SKIN ABSORPTION: No evidence of adverse effects from available information. INHALATION: Short-term harmful health effects are not expected from vapor generated at ambient temperature. SKIN CONTACT: A single relatively short exposure causes no known adverse effects. Several repeated prolonged exposures (24 to 48 hours) may irritate. EYE CONTACT: Direct contact may cause temporary discomfort with mild redness, dryness, and irritation. EFFECTS OF REPEATED OVEREXPOSURE: No evidence of adverse effects from available information. MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE: A knowledge of the available toxicology information and of the physical and chemical properties of the material suggests that overexposure is unlikely to aggravate existing medical conditions. SIGNIFICANT LABORATORY DATA WITH POSSIBLE RELEVANCE TO HUMAN HEALTH HAZARD EVALUATION: None currently known. Refer also to section 11. OTHER EFFECTS OF OVEREXPOSURE: None currently known.
EMERGENCY AND FIRST AID MEASURES: SWALLOWING: No emergency care anticipated. SKIN: Wash with soap and water. INHALATION: No emergency care anticipated. EYES: Immediately flush eyes with water for at least 15 minutes. Obtain medical attention if discomfort persists. NOTES TO PHYSICIAN: There is no specific antidote. Treatment of overexposure should be directed at the control of symptoms and the clinical condition of the patient. NOTE: Do not induce vomiting. Emesis of this material may prove difficult due to its high viscosity. Aspiration may cause lung damage.
FLASH POINT (test method(s)): >440°F (226°C) by Cleveland Open Cup
FLAMMABLE LIMITS IN AIR (by volume):
LOWER: N/A
UPPER: N/A
EXTINGUISHING MEDIA:
Water spray, foam, dry chemical, or carbon dioxide (CO2) or other agents
suitable for Class B fires.
SPECIAL FIRE FIGHTING PROCEDURES:
Do not spray a solid stream of water or foam directly into a pool of hot,
burning liquid as this may cause frothing, and may intensify the fire. Use
self-contained breathing apparatus when fighting fire in an enclosed area.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
This product contains components which can generate sulfur dioxide, or small
amounts of other toxic materials as a byproduct of oxidative thermal
decomposition when exposed to fire. See section 10 for further information
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Spills should be contained with mechanical barriers. Add absorbent to the spill area (e.g. absorbent fabrics, sand, earth, sawdust). Transfer spilled material and saturated absorbents to suitable containers for disposal. WASTE DISPOSAL METHOD: Dispose of in accordance with all Federal, State, and local regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Normal precautions common to safe manufacturing practice should be followed in handling and storage. Keep container closed, in a cool dry place. Any proposed use of this product in elevated-temperature processes should be thoroughly evaluated to assure that safe operating conditions are established and maintained.
OCCUPATIONAL EXPOSURE VALUES AND SOURCE: None. RESPIRATORY PROTECTION: None should be required for normal use. VENTILATION: General (mechanical) room ventilation is expected to be satisfactory for normal handling. PROTECTIVE GLOVES: Nitrile gloves or similar types. EYE PROTECTION: Use safety goggles. OTHER PROTECTIVE EQUIPMENT: Eye bath and safety shower.
BOILING POINT: > 400°C (> 752°F) SPECIFIC GRAVITY (H2O=1): 1.1 to 1.3 FREEZING POINT: N/A VAPOR PRESSURE : N/A VAPOR DENSITY (air=1): N/A EVAPORATION RATE (Butyl Acetate=1): N/A SOLUBILITY IN WATER (By wt): very low APPEARANCE: Clear, slight yellow tint ODOR: mild thiophenol odor. PHYSICAL STATE: Liquid PERCENT VOLATILES (by wt): See Section 15 Note: The above information is not intended for use in preparing product specifications.
STABILITY: Stable CONDITIONS TO AVOID: None INCOMPATIBILITY: Oxidizing materials can cause a reaction. HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS: Burning can produce sulfur dioxide, and small amounts of other toxic fumes. Acute overexposure to the products of combustion may result in irritation of the respiratory tract. HAZARDOUS POLYMERIZATION: Will not occur
COMPONENT: SL-5267
Oral LD50 (mg/kg): >34,600 mg/kg (Rat). Practically nontoxic.
Dermal LD50 (mg/kg): >10,200 mg/kg (Rabbit). Practically nontoxic.
Vapor Inhalation LC50 (mg/l): 0 out of 6 animals (Rat) died when exposed to an
average theoretical vapor concentration of 0.029 mg/l
air.
Other: Patch testing of 50 human volunteers produced no positive
reactions following initial application, any of 15 serial applications
or upon subsequent rechallenge 2 weeks later. SL-5267 is not
considered a primary irritant, a fatiguing agent or a sensitizing
agent.
Refer to Section 3 for further discussion of the health hazards associated
with this product.
Exotoxicity: No information found in our select references. Environmental Fate: No information found in our selected references. Bioaccumulation: No information found in our select references.
Product to be disposed of, spilled liquid product, or spills absorbed on a solid medium may be classified as "hazardous waste" (DO18) due to the presence of benzene over 0.5 mg/L. Waste should be analyzed in accordance with Method 1311 Toxicity Characteristic Leaching Procedure (TCLP) and/or compared to the criteria of 40 CFR 261.24 to insure proper disposal. Waste product may also be classified as waste oil under state and federal regulations. Any discarded product, whether "hazardous waste" or not, should be incinerated in accordance with all local, state, or federal laws and regulations. Consult your attorney or appropriate regulatory officials for information on such disposal.
The data provided in this section is for information only. Please apply the appropriate regulations to properly classify your shipment for transportation. This product is not hazardous under the applicable DOT, ICAO/IATA, or IMDG regulations.
TSCA Inventory: All components are listed.
SARA Hazard Notification
Hazard Categories Under Title III Rules (40 CFR 370): Not Applicable
Section 313 Toxic Chemical(s): Not Applicable
CERCLA Reportable Quantity: Not Applicable
Chemicals (Hazards Information and Packaging) Regulations 1993 requires
physico-chemical and health hazard determination of all substances and
preparations manufactured, transported, stored, modified, or consumed within
the EEC. Components present in this product at a level which could require
reporting under the statute are:
**** NONE ****
Refer to Section 2 for OSHA Hazardous Chemical(s) and Section 13 for RCRA
classification.
California Prop. 65:
Proposition 65 requires manufacturers or distributors of consumer products
into the State of California to provide a warning statement if the product
contains ingredients for which the State has found to cause cancer, birth
defects or other reproductive harm. If this product contains an ingredient
listed by the State of California to cause cancer or reproductive toxicity,
it will be listed below:
No data has been generated to our knowledge whether this material has been
found to cause cancer, birth defects or other reproductive harm. Therefore,
to be on the safe side, we would advice treating this product as if it does
have those properties and respond accordingly.
MASSACHUSETTS 105 CMR 670.000 Right-To-Know, Substance List (MSL)
Hazardous Substances and Extraordinarily Hazardous Substances on the MSL
must be identified when present in products. Components present in this
product at a level which could require reporting under the statute are:
**** NONE ****
PENNSYLVANIA Right-To-Know, Hazardous Substance List
Hazardous Substances and Special Hazardous Substances on the List must be
identified when present in products. Components present in this product at
a level which could require reporting under the statute are:
**** NONE ****
CALIFORNIA SCAQMD RULE 443.1 VOC'S:
Volatile Organic Components (VOC's) = Substances with vapor pressure of ³
0.5 mm Hg at 140°C (219.2°F). This product contains < 1 % by weight VOC's.
________________________________________________________________________
OTHER REGULATORY INFORMATION:
EPA Hazard Categories: None.
C.H.I.P. Regulations:
Designation: SL-5267
Symbol: N/A
Indication of Danger: N/A
Safety Phrases: S3/S7/S8
(Ref. Sect. 7)
Disclaimer of Liability: Caution! Do not use SPI Supplies products or materials in applications involving implantation within the body; direct or indirect contact with the blood pathway; contact with bone, tissue, tissue fluid, or blood; or prolonged contact with mucous membranes. Products offered by SPI Supplies are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. SPI Supplies will not provide to customers making devices for such applications any notice, certification, or information necessary for such medical device use required by US FDA (Food and Drug Administration) regulation or any other statute. SPI Supplies and Structure Probe, Inc. make no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body tissues of fluids.********************************************************************** The information and recommendations set forth above are taken from sources believed to be accurate as of the date hereof, however SPI Supplies and Structure Probe, Inc. make no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assume no liability to any user thereof. The information contained in this sheet does not constitute a hazard assessment and should not be used in place of the user's own assessment of work place risks as required by other health and safety legislation. Be aware of the Structure Probe, Inc. Copyright Policy. Structure Probe, Inc. grants a nonexclusive license to make unlimited copies of this safety sheet for internal use only. Quite obviously, this information would pertain only to this material when purchased from SPI Supplies as product from other sources, with other ingredients and impurity levels could have substantially different properties.
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
