SPI Supplies SPI Supplies Division
Structure Probe, Inc.
P.O. Box 656 West Chester, PA 19381-0656 USA
Phone: 1-(610)-436-5400 Fax: 1-(610)-436-5755
E-mail: spi3spi@2spi.com
WWW: http://www.2spi.com
Manufacturer's CAGE: 1P573

Material Safety Data Sheet

SPI #05067-AB Silver Epoxy – Hardener only

Silver Epoxy Section 01 Identification


Date Effective......... January 8, 2009 
                        (most recent revision)


Chemical Name/Synonyms. Silver Epoxy Hardener
  


Emergencies      Contacting CHEMTREC 24 Hour Emergency 
Use Only #'s.... Worldwide phone : 1-(703)-527-3887
                 Worldwide FAX   : 1-(703)-741-6090
                 Toll-free phone : 1-(800)-424-9300
                                   (USA only)


Product or Trade Name....  SPI #05067-AB  Silver Epoxy Hardener




Hazardous
Material
Information System
USA		Health

3   National Fire
Protection
Association
USA		 



                  Fire
Hazard               1



                  Reactivity            0




                  Personal
Protection   0




NFPA Rating:
(estimated) Health:  3; Flammability: 1 ; Reactivity:  0

Section 2 Composition

Component NameCAS #PercentEINECS/ELINCS
Triethylenetetramine 112-24-3 1-10 203-950-6
2,4,6-tris(dimethylaminomethyl)phenol 90-72-2 <10 202-013-9
Proprietary Modified Amine NJ 29943300001-5940P 60-90 n/a

Section 3: Hazard Identification


Emergency overview:

Eye or mouth contact may cause serious burns.  This material is a
strong sensitizer. This material is a respiratory irritant.

Potential Health Effects

Eye: Eye contact may cause serious burns.

Skin: Skin contact may lead to sensitization.

Ingestion: Mouth contact may cause serious burns.

Inhalation: This material is a respiratory irritant.

Section 4: First Aid Measures



Eyes: Flush with plenty of water for at least 15 minutes and seek
medical attention.

Skin: Wash with plenty of soap and water.  Remove contaminated
clothing and wash before reuse.

Ingestion: There is no known antidote, but give milk or water.
Do NOT induce vomiting if swallowed.  Seek medical attention.

Inhalation: Remove to fresh air.

Section 5: Fire Fighting Measures

      

General Information:
	Flash Point: >200° F (setaflash)

Extinguishing Media:
	Dry chemicals, chemical foam, carbon dioxide, water

Fire Righting Procedures:
	Avoid breathing smoke.  Addition of water may reduce flame intensity.
		Toxic gases may be liberated. Handle as combustible.

Flammable Limits:
		LEL		n/a
		UEL		n/a

Section 6: Accidental Release Measures

      

General Information:

Spills/Leaks: Prevent skin and eye contact.  Soak up in absorbent
material, or scrape up, and transfer to a disposal container.  Wipe up
remaining residue with solvents, observing solvent flammability cautions,
or use detergents.

Section 7: Handling and Storage


Storage:
	Store in a cool place in closed containers.

Section 8: Exposure Controls and Personal Protection


Engineering Controls:
Local exhaust and/or mechanical exhaust recommended. Eyewash and
Safety shower must be available in the work area. 


Exposure Limits:



Chemical NameACGIHNIOSHOSHA - Final PELs




	Triethylenetetramine
	n/a
	n/a
	n/a





	2,4,6-tris(dimethylaminomethyl)phenol
	n/a
	n/a
	n/a





	Proprietary Modified Amine
	n/a
	n/a
	n/a





Personal Protective Equipment

Eyes: Wear safety glasses or goggles.

Skin: Wear suitable gloves.

Clothing: Wear suitable protective clothing to prevent all skin contact.

Respirators: In confined areas, use a respirator which meets the
OSHA respirator regulations found in 29CFR 1910.134 or the European
Standard EN149.  Always use a NIOSH or European Standard approved respirator
when necessary.

Section 9: Physical and Chemical Properties


Physical State: Viscous liquid
Appearance: Pale straw color 
Odor:  amine odor
pH:  n/a
Vapor Pressure: <1 mm Hg
Vapor Density:  n/a
Evaporation Rate:  n/a
Viscosity:  n/a
Boiling Point: >200°F
Freezing/Melting Point: n/a   
Autoignition Temperature:  n/a
Flash Point:  >200°F
Decomposition Temperature:  n/a
Explosion Limits
	Lower:  n/a
	Upper:  n/a

Solubility in water: partial  
Specific Gravity/Density:  1.0
Molecular Formula:  n/a
Molecular Weight:  n/a

Section 10: Stability and Reactivity


Chemical Stability: This material is stable.

Conditions to Avoid: Avoid contact with metals corroded by liquid
amines.  Avoid high temperatures and chlorinated compounds. Avoid exotherms
used to cure epoxy.

Incompatibility with Other Materials: Strong acids and bases, strong
oxidizing agents, chlorinated compounds.

Hazardous Decomposition of Products: Thermal products, carbon monoxide,
carbon dioxide, aldehydes, nitrogen oxides.

Hazardous Polymerization: Will not occur.

Section 11: Toxicological Information


RTECS#:  n/a

LD50/LC50 Information:
	Oral, LD 50     > 1000 mg/kg
	Dermal, LD 50   > 1400 mg/kg

Teratogenicity: n/a

Reproductive Effects: n/a

Neurotoxicity:  n/a

Mutagenicity: n/a

Section 12: Ecological Information

No ecological information is available for this material.

Section 13: Disposal Considerations


Dispose of in accordance with all local, state and federal regulations
as a hazardous waste. Disposal may be by land burial or chemical
incineration in accordance with all local, state and federal regulations.

RCRA P-Series:  n/a
RCRA U-Series:  n/a

Section 14: Transport Information


US DOT Hazard Class: n/a

IATA (for international shipments): n/a

Section 15: Regulatory Information


United States:

TSCA: All components are listed on the TSCA inventory.

Health & Safety Reporting List: n/a

Chemical Test Rules: n/a

Section 12b: n/a

TSCA Significant New Use Rule: n/a

SARA:

Section 302 (RQ): n/a

Section 302 (TPQ): n/a

Section 313:
	CAS# 7440-22-4 is listed.

State (Individual states in the USA)
	CAS# 7440-22-4 is listed on the Florida and Massachusetts lists.

California No Significant Risk Level: n/a

California Prop. 65: n/a

  

European/International Regulations:
European Labeling in Accordance with EC Directives

Hazard Symbols: Xn
Risk Phrases:        
	R22  Harmful if swallowed
	R36/38  Irritating to eyes and skin
	R43  May cause skin sensitization by skin contact

Safety Phrases:
	S2  Keep out of reach of children
	S26  In case of contact with eyes, rinse immediately with plenty of water and seek medical attention
	S28 After contact with skin, wash immediately with plenty of soap and water
	
Canada

CAS#’s 112-24-3 and 90-72-2 are listed on the DSL List.
CAS#’s 112-24-3 and 90-72-2 are not listed on the NDSL List.

Section 16: Other Information


Disclaimer of Liability:
Caution! Do not use SPI Supplies products or materials in applications involving implantation within the body; direct or indirect contact with the blood pathway; contact with bone, tissue, tissue fluid, or blood; or prolonged contact with mucous membranes. Products offered by SPI Supplies are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. SPI Supplies will not provide to customers making devices for such applications any notice, certification, or information necessary for such medical device use required by US FDA (Food and Drug Administration) regulation or any other statute. SPI Supplies and Structure Probe, Inc. make no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body tissues of fluids.

**********************************************************************

The information and recommendations set forth above are taken from sources believed to be accurate as of the date hereof, however SPI Supplies and Structure Probe, Inc. make no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assume no liability to any user thereof. The information contained in this sheet does not constitute a hazard assessment and should not be used in place of the user's own assessment of work place risks as required by other health and safety legislation.

Be aware of the Structure Probe, Inc. Copyright Policy. Structure Probe, Inc. grants a nonexclusive license to make unlimited copies of this safety sheet for internal use only. Quite obviously, this information would pertain only to this material when purchased from SPI Supplies as product from other sources, with other ingredients and impurity levels could have substantially different properties.

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:
Sunday March 21, 2010
© Copyright 2010. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo