SPI Supplies Division
Date Effective........... January 8, 2009
(most recent revision)
Chemical Name/Synonyms... Acrylic polymer with copper coated metal backing
Emergencies
Contacting CHEMTREC:
24 Hour Emergency Use Only #'s...
Worldwide phone: 1-(703)-527-3887
Worldwide FAX: 1-(703)-741-6090
Toll-free phone: 1-(800)-424-9300 USA only
Product or Trade Name.... SPI #
05012-AB, 05012A-AB, 05012B-AB, 05012C-AB
05085-AB, 05085A-AB, 05085B-AB, 05085C-AB
Synonyms................. Copper conducting tape.
| Hazardous Material Information System USA |
Health | 0 | National Fire Protection Association USA |
 |
| Fire Hazard | 0 | |||
| Reactivity | 0 | |||
| Personal Protection |
Component Name CAS # Percent EU # Acrylic Polymer 9017-68-9 50-75 N/A Copper Metal Backing 7440-50-8 25-50 231-159-6
Emergency overview: Avoid inhaling thermal decomposition products and dust created by sanding, cutting, or grinding the product. Appearance: Roll of tape, metal backing, clear adhesive. Flash Point: N/A Warning! Target Organs: None. Potential Health Effects Eye: Contact with eyes is not expected during normal conditions of use. Skin: No adverse health effects are expected from skin contact. Ingestion: Ingestion is not a likely exposure route under normal usage conditions of this product. Inhalation: No adverse health effects are expected from inhalation, unless the product is over heated and decomposition occurs. Cutting, grinding, or sanding this product can produce dust that may irritate the respiratory system.
Eyes: No first aid measures are anticipated. Skin: No first aid measures are anticipated. Ingestion: No first aid measures are anticipated. Inhalation: No first aid measures are anticipated.
General Information: Always wear full protective equipment including self containing breathing apparatus operating at positive pressure. Auto Ignition Temperature: N/A Flash Point: N/A Flammability: N/A. Hazardous Combustion Products: Carbon monoxide, carbon dioxide. Unusual Fire/Explosion Hazards: None. Extinguishing Media: Water spray, carbon dioxide. Protective Measures: This product may emit irritating or toxic fumes under extreme temperatures or fires.
Spills/Leaks: Not applicable, spills are not considered a hazard of this product.
Handling: Always wear protective equipment appropriate to the task. Wash hands thoroughly after use. Storage: Store at room temperature and under conditions recommended on product literature.
Engineering Controls: Ventilation should be adequate to prevent breathing
of dust particles. If airborne contamination is to be exceeded, a NIOSH approved
respirator in accordance with OSHA regulations should be employed: half-mask dust
respirator.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
Acrylic Polymer None None None
Copper Metal Backing 0.2 mg/m3 1 mg/m3 TWA 0.1 mg/m3 TWA
1 mg/m3 TWA 100mg/m3 IDHL 1 mg/m3 TWA
OSHA Vacated PEL: Copper, 0.1 mg/m3 TWA (fumes, dust, mists on
Cu).
Personal Protective Equipment
Eyes: None required.
Skin: None required.
Clothing: None required.
Respirators: If airborne contamination is to be exceeded, a NIOSH approved
respirator in accordance with OSHA regulations should be employed: half-mask dust
respirator.
Physical State: Solid.
Appearance: Roll of tape, metal backing, clear adhesive.
Odor: None.
pH: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Evaporation Rate: N/A
Viscosity: N/A
Boiling Point: N/A
Freezing/Melting Point: N/A
Autoignition Temperature: N/A
Flash Point: N/A
Decomposition Temperature: N/A
Explosion Limits
Lower: N/A
Upper: N/A
Solubility in water: N/A
Specific Gravity/Density: N/A
Molecular Formula: N/A
Molecular Weight: N/A
Chemical Stability: Stable. Conditions to Avoid: None. Incompatibility with Other Materials: None known. Hazardous Decomposition of Products: Carbon monoxide, carbon dioxide. Hazardous Polymerization: Will not occur.
No toxicological information is available at this time.
No ecological information is available at this time.
Waste Disposal: In accordance with all local, state, and federal regulations. This product can be disposed in a sanitary landfill.
US DOT Hazard Class: Not regulated. IATA (for international shipments): Not regulated.
United States
TSCA: CAS # 7440-50-8 is listed on the TSCA inventory.
TSCA Section 12b: None of the components of this product are listed under
TSCA Section 12b.
TSCA Significant New Use Rule: None of the components of this product have
a Significant New Use Rule under TSCA.
Health & Safety Reporting List: None of the components of this product are
on the Health & Safety Reporting List.
Chemical Test Rules: None of the components of this product are under a
Chemical Test Rule.
CERCLA:: CAS # 7440-50-8: 5000 lb final RQ (no reporting of releases of
this hazardous substance is required.
SARA Codes: CAS # 7440-50-8: Immediate, delayed, fire.
SARA Section 302 Extremely Hazardous Substances: None of the components of this
product have a TPQ.
SARA Section 313: This product contains COPPER (CAS # 7440-50-8, 100%) which
is subject to the reporting requirements of Section 313 of SARA Title III and 40
CFR Part 373.
Clear Air Act:
This product does not contain any hazardous air pollutants.
This product does not contain any Class 1 Ozone depleters.
This product does not contain any Class 2 Ozone depleters.
Clean Water Act: None of the components of this product are listed as
Hazardous Substances under the Clean Water Act. CAS # 7440-50-8 is listed as a
Priority Pollutant under the Clean Water Act. CAS # 7440-50-8 is listed as a
Toxic Pollutant under the Clean Water Act.
OSHA: None of the components in this product are considered highly hazardous
by OSHA.
State (Individual states in the USA): CAS # 7440-50-8 can be found on the
following state right to know lists:
California.
New Jersey.
Pennsylvania.
Minnesota.
Massachusetts.
European/International Regulations
European Labeling in According with EC Directives
Hazard Symbols: None.
Risk Phrases: None.
Safety Phrases:
S2 Keep out of the reach of children.
S20/21 When using do not eat, drink, or smoke.
S22 Do not breathe dust.
WGK (Water Danger/Protection): CAS # 7440-50-8: 0
Canada
WHMIS: This product has a WHMIS classification of D2B, B4.
This product has been classified in accordance with the hazard criteria
of the Controlled Products Regulations and the MSDS contains all of the
information required by those regulations.
DSL: CAS # 7440-50-8 is specified on the DSL.
Canadian Ingredient Disclosure List: CAS # 7440-50-8 is listed on
the Canadian Ingredient Disclosure List. CAS # 9017-68-9 is listed on the DSL
list.
If this product should be used in ways that are outside of the intended applications in scanning electron microscope laboratories, and if it is going to be formulated into some other system, so that it becomes just another component of that other system, read the MSDS sheets for the other components before blending as the resulting mixture may have the hazards of all of its parts.
Disclaimer of Liability:
Caution! Do not use SPI Supplies products or materials in applications involving implantation within the body; direct or indirect contact with the blood pathway; contact with bone, tissue, tissue fluid, or blood; or prolonged contact with mucous membranes. Products offered by SPI Supplies are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. SPI Supplies will not provide to customers making devices for such applications any notice, certification, or information necessary for such medical device use required by US FDA (Food and Drug Administration) regulation or any other statute.
SPI Supplies and Structure Probe, Inc. make no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body tissues of fluids.
The information and recommendations set forth above are taken from sources believed to be accurate as of the date hereof, however SPI Supplies and Structure Probe, Inc. make no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assume no liability to any user thereof. The information contained in this sheet does not constitute a hazard assessment and should not be used in place of the user's own assessment of work place risks as required by other health and safety legislation. Be aware of the Structure Probe, Inc. Copyright Policy. Structure Probe, Inc. grants a nonexclusive license to make unlimited copies of this safety sheet for internal use only. Quite obviously, this information would pertain only to this material when purchased from SPI Supplies as product from other sources, with other ingredients and impurity levels could have substantially different properties.
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
