Information System
USA
Protection Association
USA
Date Effective.......... January 8, 2009
(most recent revision)
Chemical Name/Synonyms... Sodium periodate; Sodium metaperiodate;
Sodium salt of periodic acid
Emergencies
Contacting CHEMTREC:
24 Hour Emergency Use Only #'s...
Worldwide phone: 1-(703)-527-3887
Worldwide FAX: 1-(703)-741-6090
Toll-free phone: 1-(800)-424-9300 USA only
Product or Trade Name.... SPI-Chem™ Sodium Periodate
| Hazardous
Material Information System USA | Health | 2 | National Fire Protection Association USA | |
| Fire Hazard | 0 | |||
| Reactivity | 0 | |||
| Personal Protection |
Component Name CAS # Percent EINECS/ELINCS Sodium periodate 7790-28-5 >99 232-197-6
Emergency overview: Strong oxidizer. Contact with other material may cause a fire. Appearance: White crystalline solid . Flash Point: Not available. Warning! Strong Oxidizer. Target Organs: Eyes, Skin, Respiratory System Potential Health Effects Eye: Causes eye irritation. Skin: Causes skin irritation. May be harmful if absorbed through the skin. Ingestion: May be harmful if swallowed. May cause irritation of the digestive tract. Inhalation: May be harmful if inhaled. Causes respiratory tract irritation. Chronic: Repeated or prolonged skin contact may cause dermatitis.
Eyes: Flush eyes with copious amounts of water for at least 15 minutes, lifting the eyelids. Seek immediate medical attention. Skin: Flush skin with copious amounts of water for at least 15 minutes, removing contaminated clothing and shoes. Seek medical attention. Ingestion: Give 2-4 cupfuls of milk or water if the victim is conscious and alert. Never give anything by mouth to an unconscious person. Seek immediate medical attention. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention immediately. Notes to Physician: Treat symptomatically and supportively.
General Information: Flash Point: Not available Explosion Limits: Upper: Not available Lower: Not available Extinguishing Media: Use water only! May require flooding with water in order to eliminated hazardous reactions, since this material generates its own oxygen. Do NOT use dry chemicals, CO2, Halon, or foams. Protective Gear: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH or European Standard EN 149 (approved or equivalent), and full protective gear. Strong oxidizer. Contact with other material may cause fire.
General Information: Wear chemical safety goggles, face protection, appropriate protective gloves and protective clothing to prevent skin exposure, a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH or European Standard EN 149 (approved or equivalent), and full protective gear. Spills/Leaks: Sweep up material and place in suitable disposal container. Keep all combustibles away from spilled material. Provide ventilation. Avoid raising dust.
Handling: Wash thoroughly after handling. Use adequate ventilation. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin and clothing. Keep from contact with combustible materials. Minimize dust formation and accumulation. Avoid breathing dust. Storage: Store in tightly closed container in cool, dry, well-ventilated area. Keep away from incompatible materials. Keep away from all combustible materials. Keep away from all reducing agents.
Engineering Controls: Eyewash station and safety shower required. Provide adequate ventilation to keep airborne concentrations low. Exposure Limits: Chemical Name ACGIH NIOSH OSHA - Final PELs Sodium periodate none none none OSHA Vacated PELs: None listed for this material. Personal Protective Equipment Eyes: Chemical safety goggles Skin: Wear appropriate protective gloves to prevent skin contact. Clothing: Wear suitable protective clothing to prevent skin contact. Respirators: If irritation or other symptoms are experienced, use a MSHA/NIOSH or European Standard EN 149 approved respirator.
Physical State: crystalline solid Appearance: white Odor: odorless pH: Not available Vapor Pressure: Not available Vapor Density: Not available Evaporation Rate: Not available Viscosity: Not available Boiling Point: Not available Freezing/Melting Point: 300°C (decomposes) Autoignition Temperature: Not available Flash Point: Not available Decomposition Temperature: Not available Explosion Limits: Lower: Not available Upper: Not available Solubility in water: 80 grams/liter @ 20°C Specific Gravity/Density: Not available Molecular Formula: NaIO Molecular Weight: 213.89
Chemical Stability: Stable under normal conditions of temperature and pressure. Conditions to Avoid: Dust production. Incompatibility with Other Materials: Combustible materials, Strong reducing agents. Hazardous Decomposition of Products: Hydrogen iodide, Sodium oxide, Iodine. Hazardous Polymerization: Will not occur
RTECS#: SD4550000 LD50/LC50 Information: Not available Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65. Teratogenicity: Not available. Reproductive Effects: Not available. Neurotoxicity: Not available. Mutagenicity: Not available. Other Studies: No data available.
Exotoxicity: No information available. Environmental Fate: No information available.
Dispose of in accordance with all federal, state and local regulations. RCRA P-Series: None listed. RCRA U-Series: None listed.
US DOT Hazard Class: Shipping Name: Oxidizing solid, N.O.S. Hazard Class: 5.1 UN Number UN1479 Packing Group: II IATA (for international shipments) Shipping Name: Oxidizing solid, N.O.S. Hazard Class: 5.1 UN Number UN1479 Packing Group: II
United States:
TSCA:
CAS# 7790-28-5 is listed on the TSCA Inventory.
Health & Safety Reporting List:
CAS# 7790-28-5 is not listed on the Health & Safety Reporting List.
Chemical Test Rules:
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b:
None of the chemicals in this material are listed under TSCA Section 12B.
TSCA Significant New Use Rule:
None of the chemicals in this product have a SNUR under TSCA.
CERCLA Section 103:
None of the chemicals in this material have an RQ.
SARA:
Section 302 (TPQ)
None of the chemicals in this material have a TPQ.
SARA Codes
CAS# 7790-28-5: Fire.
Section 313
None of the chemicals in this material are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this material is listed as Hazardous Substances
under the CWA.
None of the chemicals in this product are listed as Priority Pollutants
under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under
the CWA.
OSHA:
None of the chemicals in this product is considered highly hazardous by OSHA.
State (Individual states in the USA)
None of the chemicals in this product is listed on state lists from CA,
FL, MA, MN, NJ or PA.
California Prop. 65:
None of the chemicals in this product is listed.
European/International Regulations:
European Labeling in Accordance with EC Directives
Hazard Symbols: Xn, O
Risk Phrases:
R 8 Contact with combustible material may cause fire.
R 20 Harmful by inhalation.
R 21 Harmful in contact with skin.
R 22 Harmful if swallowed.
R 36 Irritating to eyes.
R 37 Irritating to the respiratory system.
R 38 Irritating to the skin.
Safety Phrases:
S 17 Keep away from combustible material.
S 26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
S 36 Wear suitable protective clothing.
S 37 Wear suitable gloves.
S 38 Wear eye/face protection.
WGK (Water Danger/Protection):
CAS# 7790-28-5 : 1
Canada
CAS# 7790-28-5 is listed on Canada’s DSL List.
This product has a WHMIS classification of C.
Disclaimer of Liability: Caution! Do not use SPI Supplies products or materials in applications involving implantation within the body; direct or indirect contact with the blood pathway; contact with bone, tissue, tissue fluid, or blood; or prolonged contact with mucous membranes. Products offered by SPI Supplies are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. SPI Supplies will not provide to customers making devices for such applications any notice, certification, or information necessary for such medical device use required by US FDA (Food and Drug Administration) regulation or any other statute. SPI Supplies and Structure Probe, Inc. make no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body tissues of fluids. This product is intended for external contact only with human skin.
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
