SPI Supplies
SPI Supplies Division
Structure Probe, Inc.

P.O. Box 656 West Chester, PA 19381-0656 USA
Phone: 1-(610)-436-5400 Fax: 1-(610)-436-5755
E-mail: spi3spi@2spi.com

WWW: http://www.2spi.com
Manufacturer's CAGE: 1P573

Material Safety Data Sheet

SPI #01818-AB, 01819-AB, 01856-AB, 01857-AB Cellulose Acetate Tape and Sheets


Section 1: Identification


Date Effective........... January 8, 2009
                          (most recent revision)


Chemical Name/Synonyms...  Cellulose acetate
                            


Chemical family..........  Acetate


Emergencies                
Contacting CHEMTREC:

24 Hour Emergency Use Only #'s......   
Worldwide phone: 1-(703)-527-3887
Worldwide FAX:   1-(703)-741-6090 
Toll-free phone: 1-(800)-424-9300 USA only


Product or Trade Name....  SPI Replicating Tape and Sheets

                           
CAS #....................  9004-35-7

NIOSH (RTECS) Number:  1005201CA

Chemical Formula.........  Not known

Hazardous Material
Information System
USA
Health 0 National Fire
Protection Association
USA
Fire Hazard 1
Reactivity 0
Personal Protection
NFPA Rating: Health: 0 Fire: 1 Reactivity: 0



Section 2 Composition

Component Name          CAS #       Percent     EIINECS/ELINCS
Cellulose diacetate     9035-69-2   >80%        n/a
Diethyl phthalate       84-66-2     1-20%       201-550-6
Other ingredients       none        <1%         n/a





Section 3: Hazard Identification


Emergency overview:

       This material is not hazardous by OSHA Hazard Communication 
       Definition

Signal Word

       CAUTION!

Chronic Hazard:  No
Accute Health Hazard:  Slight
Contact Hazard:  Slight

Fire Hazard:  None

Physical Health Hazards:

       None known

Physical state:    Solid

Color:            Transparent and colorless

Odor:             None


Odor threshold:   Not applicable


Potential Health Effects:

Routes of exposure

           Ingestion

Signs and Symptoms of Acute Exposure:

           None known

Skin contact:

           None known

Inhalation:

           If the product is used as intended, it just not possible to
           envision how one could "inhale" this solid material.

Eye contact:

           Mechanical irritation is not envisioned as being possible.

Ingestion:

           Ingestion is unlikely, so long as product is used as intended.


Chronic Health Effects Summary:

           No known chronic health effects.


Conditions Aggravated by Exposure:

           No known conditions are aggravated by this material.


Section 4: First Aid Measures


Take proper precautions to ensure your own health and safety before
attempting to rescue and providing first aid.  For specific information
refer to the Emergency Overview in Section of this MSDS.

Inhalation:  If this occurs, contact physician at once.

Eye Contact:   Wash eyes with clean low-pressure water.  If 
               irritation persists, seek medical advice.  It 
               is not envisioned that eye contact requiring 
               this kind of response could ever occur.

Skin Contact:  No adverse health effects are anticipated, however 
               if irritation developes, then contact physician at 
               once.

Ingestion:     Contact physician at once.




Section 5: Fire Fighting Measures


NFPA Rating:  Not known

Flammability classification:

         Not classified.

Flash Point/Method:   Not applicable

Auto-Ignition Temperature:  Not known


Flammable Limits:  Lower:   Not applicable
                   Upper:   Not applicable

Hazardous Combustion Products:

         Carbon monoxide, carbon dioxide

Special Conditions to Avoid:

         None known

Extinguishing Media:

          Small fires:  Water spray, foam carbon dioxide, dry chemical.

          Large fires:  Water spray, foam carbon dioxide, dry chemical.


Fire Fighting Instructions:

          Protective Equipment/Clothing:  Wear a NIOSH approved positive
          pressure self-contained breathing apparatus and firefighter
          turnout gear.  However, we would consider this kind of protection 
          not necessary if the small laboratory quantities are involved, 
          that is, the levels envisioned for research quantities.

         Instructions:  Use flooding quantities of water until well after
         fire is out.





Section 6: Accidental Release Measures


Release response:

              Pick up and retain for recycle or disposal.  Do not flush
              spilled material to the sewer or the environment.

Reportable Quantities:  See Section 15: Regulatory information.



Section 7: Handling and Storage


Handling:       No particular precautions are needed.  If working 
                around highly flammable materials, some attention 
                has to be paid to the tendency of cellulose acetate 
                to pick up a static charge.   No particular precautions 
                would be needed when cutting our a small piece of the 
                product for use in an experiment with the normal exception 
                of eye protection.

Storage:       Avoid wide variations in temperature and humidity.  Best
                stored between 15°C(59°F) and 23°C(73°F).  Avoid exposure to
                solvent vapors.  Do not store in bright sunlight. Keep
                container dry.  Keep away from strong oxidizing agents.




Section 8: Exposure Controls and Personal Protection


Engineering Controls:  If user operations generate dust or fumes,
ventilate area to prevent accumulation.  However, such use would be outside 
the scope for which this product was originally released.

Personal Protection:

    Inhalation:  Use appropriate respiratory protection where atmosphere
exceeds recommended limits.  Total Dust (PNOC):  ACGIH 10 mg/M3, 
OSHA 15 mg/M3.  Respirable Dust(PNOC) ACGIH 3 mg/M3, OSHA 5 mg/M3.

    Skin:  Protective clothing such as long sleeves or a lab coat should
be worn.  When handling heated materials, also be sure to use heat-resistant
gloves, boots and face protection.

    Eye:  Always use safety glasses, even for work with small quantities,
such as the making of positive replicas.  The concern is really more from 
the acetone solvent being used to soften and dissolve the cellulose acetate.





Section 9: Physical and Chemical Properties


Boiling Point/Range:  Not applicable

pH:                   Not applicable

Vapor Pressure:       Not applicable

Viscosity:            Not applicable

Specific Gravity:
        Solid/Liquid         1.31 - 1.32 (water = 1)
        Vapor                Not applicable

Water solubility:     Insoluble

Melting/Freezing Point:  Not applicable


Evaporation Rate:     Not applicable

Vapor Density (Air = 1):    Not applicable/Not available

Percent volatiles by volume:  Not applicable/Not available





Section 10: Stability and Reactivity


Chemical Stability:   The product is stable


Conditions to Avoid:  None known, however the material should be kept 
                             away from high temperatures and open flames.

Incompatibility with: Strong oxidizers

Hazardous Products of Deposition:  Carbon monoxide, carbon dioxide, 
acetic acid

Reactions with Air and Water:  Does not react with air, water or other
common materials.



Section 11: Toxicological Information


Summary:   Not considered to be toxic to humans or animals

Component: Cellulose diacetate, Diethyl phthalate

LC50 (INHL):  None listed by manufacturer

Skin Effects:   No skin effects are expected from exposure to cellulose
contact.

Acute Oral Effects:  None known

Acute Inhalation Effects:  None known

Chronic Effects/Carcinogenicity:
          None expected

Reproductive/Development Effects:
          No reproductive or developmental effects are expected.





Section 12: Ecological Information


Exotoxicity:  Exotoxicity is expected to be low based on the low water
solubility of cellulose acetate.

Environmental Fate:  No information found in our selected references.

Bioaccumulation:  Not expected to occur.



Section 13: Disposal Considerations


This material is NOT classified as a hazardous material by RCRA.  Use only
licensed transporters and permitted disposal facilities and conform to all
laws.

Recycle to process, if possible.




Section 14: Transport Information

 

Proper Shipping Name:  Cellulose acetate

DOT Hazard Class:      Non-Regulated


UN/NA ID:              Not Regulated


Packing Group:         Not Applicable


Labels:                Not Regulated

Marine Pollutant:      No

NAER Guidebook:        Not Regulated

DOT Status:            Not Regulated




Section 15: Regulatory Information


TSCA:  All components of this product are listed on the TSCA 8(b)
inventory.  If identified components of this product are listed under
the TSCA 12(b) Export Notification Rule, they will be listed below.

    TSCA 12(b) Component      Listed under TSCA Section
            None                         None

SARA-Section 313 Emissions Reporting:

    Component                  Reporting Threshold

SARA-Section 311/312:  No components present in this product are
subject to the reporting requirements of this statute.

CERCLA Hazardous Substances and their Reportable Quantities: 

    Component                  Reportable Quantity
    84-66-2                    1000 lb, 454 kg

State Right to Know Lists:
    84-66-2 is listed on the CA, Ma, Mn, NJ, Pa lists.



California Prop. 65:
Proposition 65 requires manufacturers or distributors of consumer products
into the State of California to provide a warning statement if the product
contains ingredients for which the State has found to cause cancer, birth
defects or other reproductive harm.  If this product contains an ingredient
listed by the State of California to cause cancer or reproductive toxicity,
it will be listed below:

WGK:
84-66-2: 2

CANADA:
WHMIS:
	84-66-2 has a WHMIS of D2B

DSL/NDSL:
	84-66-2 is listed on the DSL list.

European/International:

Hazard Symbol: n/a

Risk Phrases: n/a

Safety Phrases: n/a




Section 16: Other Information

Caution! Do not use SPI Supplies products or materials in applications involving implantation within the body; direct or indirect contact with the blood pathway; contact with bone, tissue, tissue fluid, or blood; or prolonged contact with mucous membranes. Products offered by SPI Supplies are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. SPI Supplies will not provide to customers making devices for such applications any notice, certification, or information necessary for such medical device use required by US FDA (Food and Drug Administration) regulation or any other statute. SPI Supplies and Structure Probe, Inc. make no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body tissues of fluids.
************************************************************************
The information and recommendations set forth above are taken from sources believed to be accurate as of the date hereof, however SPI Supplies and Structure Probe, Inc. make no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assume no liability to any user thereof. The information contained in this sheet does not constitute a hazard assessment and should not be used in place of the user's own assessment of work place risks as required by other health and safety legislation.

Be aware of the Structure Probe, Inc. Copyright Policy. Structure Probe, Inc. grants a nonexclusive license to make unlimited copies of this safety sheet for internal use only. Quite obviously, this information would pertain only to this material when purchased from SPI Supplies or SPI authorized agents and distributors, and in original SPI Supplies packaging, as product from other sources, with other ingredients and impurity levels could have substantially different properties.

To Ask a Question or Make a Comment

To Place an Order or Request a Quote


Return to:
Tuesday February 09, 2010
© Copyright 1999 - 2010. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo