|
|
Date Effective........... July 27, 2009
(most recent revision)
Chemical Name/Synonyms...
On Label: SPI-Chem™ Epoxy Release Agent
Chemical Family.......... Hydrocarbon
Emergencies
Contacting CHEMTREC:
24 Hour Emergency Use Only #'s...
Worldwide phone: 1-(703)-527-3887
Worldwide FAX: 1-(703)-741-6090
Toll-free phone: 1-(800)-424-9300 USA only
Product or Trade Name.... SPI #01364-AB and 01365-AB
SPI-Chem™ Epoxy Release Agent
CAS #.................... Not known
Chemical Formula......... Not applicable
Component Name CAS #/EIN# ACGIH TLV OSHA PEL Wt %
Composition
Petroleum Solvent 64741-66-8 NE Ne 85-95
265-068-8
Stoddard Solvent 8052-41-3 500 ppm 100 ppm 1-4
232-489-3
Trimethylated Silica 68988-56-7 NE NE 1-4
273-530-5
Silicone Polymer Blend Mixture NE NE 5-10
NE = None Established
NFPA Rating: H: 2 F: 3 R: 1
HMIS Rating: H: 2 F: 3 R: 1
Routes of entry
Eye: Eye contact with liquid or vapor may cause irritation.
Inhalation? Yes
Skin? Yes
Ingestion? Yes
Health Hazards (Acute and chronic):
Skin contact may prove locally irritating, causing drying and/or
chapping. Excessive inhalation may cause headache and dizziness.
Effects of ingestion: Not known.
Carcinogenicity:
NTP? No
IARC Monographs? No
OSHA Regulated? No
Signs and Symptoms of Exposure:
Prolonged skin contact may cause drying and/or chapping.
Medical conditions generally aggravated by exposure:
Not established. Unnecessary exposure to this product or any
industrial chemical should be avoided.
Emergency and First Aid Procedures:
Eyes: Immediately flush eyes with copious amounts of water for
minimum 15 minutes. Call physician.
Skin: Flush with plenty of soap and water.
Inhalation: Remove to fresh air.
Ingestion: Not known but see a physician immediately.
Do not induce vomiting unless instructed by a physician.
NFPA Rating: Not known
Extinguishing Media
Fire: Water Fog, Dry Chemical and Carbon Dioxide Foam
General Hazard: Material will readily ignite at ambient temperatures. Material can accumulate static
charges which can cause an incendiary electrical discharge. DO NOT pressurize, cut, weld, braze, solder,
drill, grind, or expose caontainers to heat, flame, sparks, static electricity, or other sources of ignition.
Containers may retain product residue.
Suitable/Not suitable:
Fire: Use extinguishing media suitable for the surrounding materials.
Special firefighting procedures:
Wear NIOSH approved self-contain breathing apparatus and
protective clothing.
Unusual Fire/Explosion Hazards: None
Hazardous thermal decomposition products: None known.
Protection of fire fighters: No special measures are required.
Flammable Limits:
Lower Explosive Level (LEL): 1.5
Upper Explosive Level (UEL): 11.6
Personal precautions: Evacuate area until vapor has dispersed. Remove all sources of ignition. Stop or reduce discharge if it can safely be done. Environmental Precautions and Clean Up Methods: No special precautions
Respiratory:
Organic vapor type of respirator if ventilation is not adequate.
Ventilation:
Local exhaust for normal solvent ventilation.
Eye protection:
Safety glasses
Gloves:
Rubber or plastic gloves required.
Other protective equipment:
None.
Engineering controls: Provid general or local exhaust ventilation systems to maintain
airborne concentrations below OSHA PELs. Eyewash Station must be available to the work area.
Personal Protective Equipment
Respiratory system: Provide adequate ventilation. If OSHA PELs will be exceeded, wear an
MSHA/NIOS approved respirator to meet OSHA respirator regulations (29CFR 1910.134).
Skin and body: Laboratory coat
Hands: Impervious gloves recommended
Eyes: Goggles and/or splash shields are recommended,
especially when handling the concentrated material.
Other: Wash hands before eating, drinking, or smoking.
Physical State and Appearance: Clear liquid Odor: ethereal Boiling Point: 96-107°C (205-255°F) Melting Point: Not known Density (water = 1): 0.72 Solubility: insoluble Octanol/water partition coefficient: Not available pH: Not known Flash Point: <-7°C (19°F) Flammability: Flammable Autoignition temperature: 750°F (400°C) Vapore Presure: -63mm @ 68 °F Explosion properties: Not known
Chemical Stability: The product is stable Conditions to Avoid: None known Incompatibility with: Heat, sparks, open flame Hazardous Products of Deposition: Thermal decomposition may yield incompletely burned carbon products, silicone dioxide, carbon oxides, formaldehyde. Reactions with Air and Water: Does not react with air or water.
Summary: 500 ppm for CAS# 8052-41-3.
Skin Effects: Can be locally drying, if not also irritating.
Eye Irritation: Can be irritating to the eyes.
Sensitization: Not known
Inhalation: If excessive, could result in headache and/or dizziness.
Chronic toxicity: There is no known effect from the chronic exposure
to this product.
Exotoxicity: Not known Environmental Fate: No information found in our selected references. Bioaccumulation: Not expected to occur.
This material is NOT classified as a hazardous material by RCRA. Use only licensed transporters and permitted disposal facilities and conform to all laws. Recycle to process, if possible. Germany water class: VCI WGK: No products were found. Methods of disposal; waste of residues; contaminated packaging: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Proper Shipping Name: Petroleum Distillate N.O.S. (Naphtha Solvent) DOT Hazard Class: Hazard Class 3 UN/NA ID: UN # 1268 Packing Group: Packing Group II Air: IATA-DGR Class: Proper Shipping Name: Petroleum Distillate N.O.S. (Naphtha Solvent) DOT Hazard Class: Hazard Class 3 UN/NA ID: UN # 1268 Packing Group: Packing Group II
TSCA: All components of this product are listed on the TSCA 8(b)
inventory. If identified components of this product are listed
under the TSCA 12(b) Export Notification Rule, they will be listed
below.
TSCA 12(b) Component Listed under TSCA Section
SARA Title 3: Section 313 Information/Emissions Reporting (40 CFR 372):
Component Reporting Threshold
SARA-Section 311/312:
No components present in this product are subject to the reporting
requirements of this statute.
CERCLA Hazardous Substances and their Reportable Quantities:
Component Reportable Quantity
State Regulations:
CAS# 8052-42-3 is listed on the Florida, Massachusetts, Minnestota, Pennsylvania and Washington State Right-to-Know lists.
EU Regulations:
T – Toxic
Risk Phrases:
R 45 May cause cancer
R 46 May cause heritable genetic damage
R 65 Harmful: may cause lung damage is swallowed
Safety Phrases:
S 45 In case of accident or if you feel unwell, seek medical attention imm
S 53 Avoid exposure – Obtain special instructions before use
California Prop. 65:
Proposition 65 requires manufacturers or distributors of consumer products
into the State of California to provide a warning statement if the product
contains ingredients for which the State has found to cause cancer, birth
defects or other reproductive harm. If this product contains an ingredient
listed by the State of California to cause cancer or reproductive toxicity,
it will be listed below:
None found
Disclaimer of Liability: Caution! Do not use SPI Supplies products or materials in applications involving implantation within the body; direct or indirect contact with the blood pathway; contact with bone, tissue, tissue fluid, or blood; or prolonged contact with mucous membranes. Products offered by SPI Supplies are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. SPI Supplies will not provide to customers making devices for such applications any notice, certification, or information necessary for such medical device use required by US FDA (Food and Drug Administration) regulation or any other statute. SPI Supplies and Structure Probe, Inc. make no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body tissues of fluids.
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
