Information System
USA
Protection Association
USA
SPI Supplies Division
Date Effective........... May 23, 2007
(most recent revision)
Chemical Name/Synonyms... On Label: Alconox®
Emergencies
Contacting CHEMTREC:
24 Hour Emergency Use Only #'s...
Worldwide phone: 1-(703)-527-3887
Worldwide FAX: 1-(703)-741-6090
Toll-free phone: 1-(800)-424-9300 USA only
Product or Trade Name.... SPI #01200-AB
SPI #01200A-AB
Alconox® Powdered Detergent
|
Hazardous Material Information System USA |
Health | 1 |
National Fire Protection Association USA |
|
| Fire Hazard | 0 | |||
| Reactivity | 0 | |||
| Personal Protection |
Component Name CAS # Percent EC # Sodium Dodecylbenzenesulfonate 25155-30-0 10-30 246-680-4 Sodium Carbonate 497-19-8 7-13 207-838-8 Tetrasodium Pyrophosphate 7722-88-5 10-30 231-767-1 Sodium Phosphate 7758-29-4 10-30 231-838-7
Emergency overview: Routes of entry include skin contact, eye contact, inhalation, and ingestion. May cause irritation, abdominal pain, vomiting, diarrhea, or gastric distress Appearance: White granular powder, nearly odorless. Flash Point: None Warning! Target Organs: Eyes, skin. Potential Health Effects Eye: May cause irritation. Skin: Prolonged contact may cause irritation. Ingestion: May cause abdominal pain, vomiting, diarrhea, or gastric distress. Inhalation: Particles may cause irritation. Chronic: Contains a component that may be corrosive.
Eyes: Upon contact, wash eyes throughly with copious amounts of water for at least 15 minutes, holding the eyes open. Seek medical attention. Skin: Flush area with copious amounts of water. Remove contaminated clothing, wash thoroughly with soap and water. If irritation persists, seek medical attention. Ingestion: Upon ingestion, dilute with 2-4 glasses of water. Do not induce vomiting. Seek medical attention. Inhalation: Remove victim to fresh air. If symptoms persist, seek medical attention. Notes to Physician: Treat supportively and symptomatically.
Autoignition Temperature: N/A
Flash Point: None.
General Information: Wear full protective equipment including self containing
breathing apparatus.
Extinguishing Media: Carbon dioxide, dry chemical, foam, water, water fog.
Unusual Fire/Explosion Hazards: None
Hazardous combustion products: Oxides of carbon (COx).
Hydrocarbons.
Protection of fire fighters: No special measures are required.
Spills/Leaks: Wear appropriate protective equipment. Contain the spill. Small amounts may be flushed to sewer with copious amounts of water. Soak up spill with absorbent material and place in appropriate disposal container.
Handling: Always wear protective equipment appropriate to the task. Avoid contact with skin, eyes, and clothing. Launder contaminated clothing before reuse. Avoid extreme temperatures and physical damage. Storage: Store away from strong acids and strong oxidizing agents,in closed containers. Keep out of reach of children.
Engineering Controls: If exposure limit is exceeded, use a NIOSH approved respirator. Safety shower and eye wash stations should be readily accessible in work area. Exposure Limits Chemical Name T.L.V. Sodium Dodecylbenzenesulfonate N/A Sodium Carbonate N/A Tetrasodium Pyrophosphate 5 mg/m3 Sodium Phosphate N/A Personal Protective Equipment Eyes: Glasses with side shields or chemical splash goggles. Skin: As necessary to prevent skin contact. Clothing: Protective clothing such as long sleeves or a lab coat should be worn. Neoprene or nitrile gloves are recommended. When handling heated materials, also be sure to use heat-resistant gloves, boots and face protection. Respirators: If exposure limit is exceeded, use a NIOSH approved respirator.
Physical State: Solid.
Appearance: White granular powder.
Odor: Nearly odorless.
pH: 9.5 (1% aqueous solution).
Vapor Pressure: N/A
Vapor Density: N/A
Evaporation Rate: N/A
Viscosity: N/A
Boiling Point: N/A
Freezing/Melting Point: N/A
Autoignition Temperature: N/A
Flash Point: None
Decomposition Temperature: N/A
Explosion Limits:
Lower: N/A
Upper: N/A
Solubility in water: 100 -> 10% w/w
Specific Gravity/Density: 0.85-1.10 (water = 1).
Molecular Formula: N/A
Molecular Weight: N/A
Chemical Stability: Stable under normal conditions. Conditions to Avoid: None. Incompatibility with Other Materials: Strong acids, strong oxidizers. Hazardous Decomposition of Products: See hazardous combustion products. Hazardous Polymerization: Will not occur.
LD50: >5000 mg/kg (rat, oral). LC50: N/A Sensitization: N/A Carcinogenicity: Not listed as a carcinogen. Teratogenicity: N/A Reproductive Effects: N/A Neurotoxicity: N/A Mutagenicity: N/A
Exotoxicity: N/A Environmental Fate: N/A
Disposal: In accordance with local and federal regulations.
ADR Classification: Not regulated. Shipping Information: Not regulated.
United States
SARA Codes
SARA Hazard Categories Sections 311/312:
Immediate (Acute) Health Hazard: Yes.
Delayed (Chronic) Health Hazard: No.
Fire Hazard: No.
Sudden Release of Pressure: No.
Reactive: No.
SARA Section 313: None.
TSCA: All components of this product are listed on the TSCA inventory.
State (Individual states in the USA): Neither this product nor any of its
components appear on any state health hazard lists.
European/International Regulations:
Regulatory Information: EU labeling required.
Hazard Symbols Xi Irritant.
Risk Phrases:
R20: Harmful by inhalation.
R36/37/38: Irritating to eyes, respiratory system, and skin.
Safety Phrases:
S2: Keep out of the reach of children.
S8: Keep container dry.
S22: Do not breathe dust.
S24/25: Avoid contact with skin and eyes.
CAS# (EU#): 25155-30-0 (246-680-4).
7758-29-4 (231-838-7).
497-19-8 (207-838-8).
7722-88-5 (231-767-1).
Canada
This product has a WHMIS classification of D2B.
DSL Status: All components of this product appear on the DSL.
If this product should be used in ways that are outside of the intended applications in scanning electron microscope laboratories, and if it is going to be formulated into some other system, so that it becomes just another component of that other system, read the MSDS sheets for the other components before blending as the resulting mixture may have the hazards of all of its parts.
Disclaimer of Liability:
Caution! Do not use SPI Supplies products or materials in applications involving implantation within the body; direct or indirect contact with the blood pathway; contact with bone, tissue, tissue fluid, or blood; or prolonged contact with mucous membranes. Products offered by SPI Supplies are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. SPI Supplies will not provide to customers making devices for such applications any notice, certification, or information necessary for such medical device use required by US FDA (Food and Drug Administration) regulation or any other statute.
SPI Supplies and Structure Probe, Inc. make no representation, promise, express warranty or implied warranty concerning the suitability of these materials for use in implantation in the human body or in contact with internal body tissues of fluids.
The information and recommendations set forth above are taken from sources believed to be accurate as of the date hereof, however SPI Supplies and Structure Probe, Inc. make no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assume no liability to any user thereof. The information contained in this sheet does not constitute a hazard assessment and should not be used in place of the user's own assessment of work place risks as required by other health and safety legislation. Be aware of the Structure Probe, Inc. Copyright Policy. Structure Probe, Inc. grants a nonexclusive license to make unlimited copies of this safety sheet for internal use only. Quite obviously, this information would pertain only to this material when purchased from SPI Supplies as product from other sources, with other ingredients and impurity levels could have substantially different properties.
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
