|
|
Date Effective........... October 24, 2005
(most recent revision)
Chemical Name/Synonyms... Stannous ethylhexoate
Chemical family.......... Tin octoate
Emergencies
Contacting CHEMTREC:
24 Hour Emergency Use Only #'s......
Worldwide phone: 1-(703)-527-3887
Worldwide FAX: 1-(703)-741-6090
Toll-free phone: 1-(800)-424-9300 USA only
Product or Trade Name.... SPI #01090A-AB Catalyst for Wet Replica Kit
CAS #.................... 9002-88-4
Chemical Formula......... Not known
Stannous octoate NIOSH (RTECS) Number: 1000466SO OSHA PEL: S, 0.1 mg/m3 (Sn) ACGIH TLV: S, 0.1 mg/m3 (Sn)
Physical Health Hazards:
None known
Physical state: Liquid
Color: Pale yellow
Odor: Slight sweet odor
Odor threshold: No data available
Potential Health Effects:
Routes of exposure
Eye contact, ingestion, skin contact, inhalation
Signs and Symptoms of Acute Exposure:
Skin contact:
Skin irritation
Inhalation:
At process temperatures irritating fumes may be produced,
resulting in respiratory irritation and coughing. When used
as a component to the SPI Wet Replica kit, inhalation exposure
is not contemplated.
Eye contact:
Irritation is possible
Ingestion:
Ingestion is unlikely but if it does happen, gastrointestinal
irritation can be expected.
Chronic Health Effects Summary:
No known chronic health effects. Prolonged exposure to skin can
cause irritation.
Conditions Aggravated by Exposure:
No known conditions are aggravated by this material.
Take proper precautions to ensure your own health and safety before
attempting to rescue and providing first aid. For specific information
refer to the Emergency Overview in Section of this MSDS.
Inhalation: If symptoms are experienced, move victim to fresh
air, if symptoms persist, obtain medical attention.
Eye Contact: Wash eyes with clean low-pressure water. If
irritation persists, seek medical advice.
Skin Contact: If material contacts the skin, immediately
flush the skin with large amounts of water.
Ingestion: Adverse health effects due to ingestion are
expected and medical attention should be obtained
at once.
Flammability classification:
Not classified.
Flash Point: > 127° C (260° F)
Auto-Ignition Temperature: Not known
Flammable Limits: Lower: Not known
Upper: Not known
Hazardous Combustion Products:
Burning will produce toxic fumes. Wear self-contained breathing
apparatus and full turn our gear to fight fires.
Special Conditions to Avoid:
None specified by manufacturer
Extinguishing Media:
Water spray, foam, carbon dioxide or dry chemical.
Fire Fighting Instructions:
Protective Equipment/Clothing: Wear a NIOSH approved positive
pressure self-contained breathing apparatus and firefighter
turnout gear.
Instructions: Use flooding quantities of water until well after
fire is out.
Exposure to heat builds up pressure in closed containers, cool with water
spray.
Release response:
Pick up and retain for disposal. Cover with inert, absorbant
material and remove to disposal containers. Do not flush
spilled material to the sewer or the environment. Make sure
that all disposal of such materials is done according to
federal, state and local requirements.
Neutralizing agent: None specified by manufacturer. Under some conditions,
resin from the wet replica kit can be applied to spilled areas resulting in
polymerization of the resin, removing the spilled catalyst at the same time.
Other precautions: None specified.
Precautions: Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Store away from heat and flame. Handling: In the event of a spill, remove all sources of ignition. Storage: Keep container dry. Store away from excessive heat and away from strong oxidizing agents. Keep container closed to prevent contamination.
Engineering Controls: If user operations generate dust or fumes,
ventilate area to prevent accumulation.
Personal Protection:
Inhalation: Use NIOSH approved organic vapor respirator to
prevent exposure to vapors from hot processing.
Ventilation: Local exhaust and general (mechanical) ventilation
recommended.
Protective gloves: Impermeable gloves
Eye protection: Chemical splash goggles or face shield
Other protective equipment: Eye wash fountain, safety shower
Good hygienic practices: Wash contaminated clothing before reuse.
Supplimental health and safety data: No specified by manufacturer.
Skin: Protective clothing such as long sleeves or a lab coat
should be worn. When handling heated materials, also be sure to use
heat-resistant gloves, boots and face protection.
Eye: Always use safety glasses, even for work with small
quantities, such as the making of positive replicas.
Boiling Point/Range: Not known
pH: Not applicable
Vapor Pressure: Non-volatile
Viscosity: Not known
Specific Gravity:
Solid/Liquid > 1
Water solubility: Negligible
Melting/Freezing Point: -18°C (0°F)
Evaporation Rate: Not applicable
Decomposition temperatures: Unknown
Solubility in water: Negligible
Corrosion rate: Unknown
Chemical Stability: The product is stable and will not polymerize. Conditions to Avoid: None specified Hazardous Products of Deposition: Burning will produce toxic fumes Reactions with Air and Water: Does not react with air, water or other common materials. Materials to avoid: Strong oxidants
LD50-LD-50 Mixture: None specified by manufacturer Route of entry: Inhalation (Yes) Route of entry: Skin (Yes) Route of entry: Ingestion (No) Health Hazards, Acute and Chronic: Maybe harmful if swallowed. Maybe cause irritation. Inhalation of vapors from hot processing might be harmful. Skin Effects: Irritation
Exotoxicity: Exotoxicity is expected to be low based on the low water solubility of this material. Environmental Fate: No information found in our selected references. Bioaccumulation: Not expected to occur.
Dispose only using approved waste haulers and follow all regulations at the local, state and eventually federal levels.
Proper Shipping Name: Octoate DOT Hazard Class: Non-Regulated UN/NA ID: Not Regulated Packing Group: Not Applicable Labels: Not Regulated Marine Pollutant: Not known NAER Guidebook: Not known DOT Status: Not Regulated
TSCA: All components of this product are listed on the TSCA 8(b)
inventory. If identified components of this product are listed under
the TSCA 12(b) Export Notification Rule, they will be listed below.
TSCA 12(b) Component Listed under TSCA Section
SARA-Section 313 Emissions Reporting:
Component Reporting Threshold
SARA-Section 311/312: No components present in this product are
subject to the reporting requirements of this statute.
CERCLA Hazardous Substances and their Reportable Quantities:
Component Reportable Quantity
California Prop. 65:
Proposition 65 requires manufacturers or distributors of consumer products
into the State of California to provide a warning statement if the product
contains ingredients for which the State has found to cause cancer, birth
defects or other reproductive harm. If this product contains an ingredient
listed by the State of California to cause cancer or reproductive toxicity,
it will be listed below:
To Ask a Question or Make a Comment
To Place an Order or Request a Quote
