Crystalbond™ 562-S Stripper

Use this specially formulated stripper for the removal of Crystalbond 562 Adhesive and Mountant

Introduction:
Wafer-Mount™ 562-S Stripper is a high-performance, environmentally-safe, chemical cleaning agent developed specifically for removing Wafer-Mount™ 562, and other tenacious polymer coatings and inorganic particulates.

Features

Low Evaporation Rate
Rinses with Water
Nonflammable
Non-Reactive with Metals
Biodegradable

Usage:
Wafer-Mount™ 562-S Stripper works best in ultrasonic cleaning systems at 50-60 °C. The evaporation rate is much slower than acetone, so a good lifecycle will be achieved in comparison. As adhesive residue begins to concentrate in the stripper, 20% of the stripper should be replaced with fresh material.

Rinsing:
After removing the adhesive, a stepwise, warm-rinsing process is recommended. Rinse in a dilute, nonionic surfactant or liquid detergent system, followed by a final rinse in de-ionized water to eliminate water spots due to hard salts and contaminant redeposition.

Compatibility:
Wafer-Mount™ 562-S Stripper is nonionic and non-reactive with metals, however, it will attack many types of polymers and plastics such as elastomers and rubbers.

Handling and Storage:
Wafer-Mount™ 562-S Stripper is readily biodegradable and non-toxic to marine life. The use of gloves and eye goggles is recommended. Respiratory protection or ventilation is recommended under normal handling. When heated, vapors should be ventilated from work space. Keep container tightly closed and store in a cool, dry, well-ventilated area or cabinet. Isolate from incompatibles such as corrosives, oxidizers, or strong reducing agents.

562-S Stripper	SPI #	Each		In Stock
1 Pound	05138-AB	$128.00		Yes

Storage conditions: Room temperature
Also, isolate from incompatibles such as corrosives, oxidizers, or strong reducing agents.

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Friday May 16, 2008 © Copyright 2008. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo