SPI-Mark™ Unconjugated Colloidal Gold Probes

Do you own conjugations! Also, great for perfusion studies!

Chinese

Spanish

Sharp size distribution of SPI-Mark™ Colloidal Gold products

SPI-Mark™ unconjugated gold colloidal suspensions are of outstanding EM quality, exhibit virtually no clumping and exhibit very tight size distribution ranges, so tight in fact, that triple tagging experiments are no problem at all. Numerous protocols have now been published, and many are application specific, but for the convenience of SPI-Mark customers, we provide a generalized protocol, but it is given more for the purpose of showing generally what is involved, rather than to serve as a specific protocol for a specific experiment.

The starting material for the SPI-Mark gold conjugates is the same as what is offered here as unconjugated gold colloidal suspensions. In other words, these colloids are produced with a very tight size distribution, the actual size being measured by TEM and the data is provided on the data sheet sent with each product. The product is supplied in sterile containers ready for conjugation or other applications, such as perfusion.

Shelf-life stability of the colloid:
The product is guaranteed stable for 12 months if stored unopened at 4° C. Do not freeze. Note that we do not offer unconjugated gold in sizes less than 2 nm because the stability of such suspensions is unacceptable in terms of offering such an unstable product commercially. Once made, the unconjugated colloid has to be used within 24 hours. That is why gold of 1 nm is offered only as a stable conjugate, never as the unconjugated colloid.

Other sometimes useful information:
Colloidal particles in this size range, including gold, are inherently unstable. However, using proprietary technology, SPI-Mark colloidal gold unconjugated particles have no protein whatsoever and are free of surfactants, both of which can interfere with experimental results. We are often times asked about "what else" is present besides the gold colloid and water. There will be trace amounts of sodium citrate, tannic acid & potassium carbonate present and without them, the suspension would become unstable and the gold would precipitate out.

However, the smallest colloidal particle that we can make and still be stable, using this technology is 2.6 nm. So all SPI-Mark unconjugated gold products, of 2.6 nm or larger are indeed free of surfactants and protein, as indicated above. But should we be asked to custom make gold colloid particles, unconjugated, smaller than this size, then there would be a protein coating such as BSA.

Amount of gold present:
Each liter of colloidal suspension contains approximately 0.1g of gold (colloidal) particles. The final product is sold with an optical density as measured at 520 nm of 1.1 ą0.1 for colloid sizes of 15, 20, 30, 40 and 50 nm. The optical density for smaller sizes, that is, 2, 5 and 10 nm, is 0.85.

There is one other important point to note:
The basic for the technology that permits the manufacture of stable suspensions (e.g. one in which the particles don't clump) without a stabilization coating is the overall net charge on the colloidal particle surfaces is negative, and this provides the mechanism by which particles repel one another and the suspension remains stable. However, excessive washing of the colloid can remove or destroy this charge and the stable suspension will collapse. It should be further noted that the 2.6 nm size is "at the edge" that is, even the slightest bit of washing of the colloid will cause the collapse of the suspension immediately. However, dilution of the suspension is possible with ultra pure water. This is possible because of the extremely low levels of the reducing salts remaining in the product.

Stability information:
The SPI-Mark gold suspensions are very stable because all of the gold, in the manufacturing process, has been reduced to the colloidal metal form with absolutely no gold left in solution. In addition, there are only trace amounts of the reducing salt used in the conversion. Higher amounts of the reducing salts are one of the main reasons for product instability that have been encountered with colloidal gold suspensions from other sources. This is of course a complicated issue and one should be aware of some of the other stability considerations.

Selection of the right colloid gold particle size:
The entire product range of the SPI-Mark unconjugated colloidal gold particles is given below. The selection of the right particle size depends on the your specific application and the way you would be anticipating using the product.

Light Microscopy

Electron Microscopy (TEM and SEM)

SPI-Mark Silver Enhancement Kit

silver enhanced

Blotting procedures

Restriction of use statement:
The SPI-Mark Unconjugated Colloidal Gold is for in vitro research only and it is most definitely not for in vivo research. SPI Supplies can not take any responsibility for the use of this product family in human or animal research and would not recommend or condone it.

For your information the colloid will contain trace elements of sodium citrate, tannic acid & potassium carbonate. The toxic effects of these trace chemicals and the effect of the colloid in this way on rats has not, to my knowledge, been tested.

Also, the SPI-Mark™ unconjugated gold particles are ideal for the most demanding of perfusion studies. They are provided in sterile bottles. We report below other critical information about the SPI-Mark Unconjugated Gold particles:

Colloidal Gold Size	Particle Size Distribution (% CV)	Particles per ml
2	-	15 x 10¹³
5	< 15%	5 x 10¹³
10	< 10%	5.7 x 10¹²
15	< 10%	1.4 x 10¹²
20	< 15%	7.0 x 10¹¹
30	< 20%	2.0 x 10¹¹
40	< 20%	9.0 x 10¹⁰
50	< 20%	4.5 x 10¹⁰
60	< 20%	2.6 x 10¹⁰
80	< 20%	1.1 x 10¹⁰
100	< 20%	5.6 x 10⁹
150	< 20%	1.7 x 10⁹
200	< 20%	7.0 x 10⁸
250	< 20%	3.6 x 10⁸

Gold Colloids, Unconjugated, EM quality

Gold particle size	Volume	SPI #	Price, Each	In Stock
2 nm	100 ml	04811-AB	$ 403.76	No
5 nm	100 ml	04823-AB	403.76	No
10 nm	100 ml	04824-AB	403.76	Yes
15 nm	100 ml	04819-AB	403.76	No
20 nm	100 ml	04863-AB	403.76	No
30 nm	100 ml	04816-AB	403.76	Yes
40 nm	100 ml	04698-AB	403.76	No
50 nm	100 ml	04801-AB	403.76	No
60 nm	100 ml	04802-AB	403.76	No
80 nm	100 ml	04803-AB	403.76	No
100 nm	100 ml	04804-AB	403.76	Yes
150 nm	100 ml	04805-AB	403.76	No
200 nm	100 ml	04806-AB	403.76	No
250 nm	100 ml	04807-AB	403.76	No
2 nm	500 ml	04810-AB	947.49	No
5 nm	500 ml	04820-AB	947.49	No
10 nm	500 ml	04821-AB	947.49	No
15 nm	500 ml	04818-AB	947.49	No
20 nm	500 ml	04822-AB	947.49	No
30 nm	500 ml	04815-AB	947.49	No
40 nm	500 ml	04699-AB	947.49	No
50 nm	500 ml	04901-AB	947.49	No
60 nm	500 ml	04902-AB	947.49	No
80 nm	500 ml	04903-AB	947.49	No
100 nm	500 ml	04904-AB	947.49	No
150 nm	500 ml	04905-AB	947.49	No
200 nm	500 ml	04906-AB	947.49	No
250 nm	500 ml	04907-AB	947.49	No

Storage Conditions: Store under refrigeration
Non-hazardous from stand point of shipping

To Ask a Question or Make a Comment

To Place an Order or Request a Quote

Return to:

Sunday July 06, 2008 © Copyright 1997 - 2008. By Structure Probe, Inc.
Contacting SPI Supplies and Structure Probe, Inc.
All rights reserved.
All trademarks and trade names are the property of their respective owners.
Privacy Policy

Worldwide Distributors, Representatives, and Agents Flag logo