This box has two flexible hinges for opening and one "lock" for securing the
box in a closed and locked position. It exhibits good sealing properties
against moisture penetration. It is the perfect solution for extremely
fragile parts, die, electronic parts of implants.
These boxes can be fabricated out of anti-static plastic. However, not only
does the anti-static plastic cost considerably more than the normal plastic
materials, but the set up costs to purge the equipment before the
special plastic can be run, and then cleaned out before running the
standard plastic is also considerable and that is why the minimum order for
antistatic plastic is roughly $10,000 depending on which box is desired.
But for some applications, the anti-static formulation is needed in order
to avoid the build-up of static charge.
Outside Dimensions: 5.9" x 4.92" x 2.95" (150 x 125 x 75 mm high)
Minimum Useful Membrane Dimensions: 3.78" x 2.80" x 1.18" (96 x 71 x 30 mm)
Net weight: 336g
|
|
To Ask a Question or Make a Comment